wow, thats unreal 13X8 with that kind of power, may I ask what gear box you are using? Is it an A+ turbo box?

yeah Ian,,, Yours will be a better engine all round really, with what we`ve learned along the way with this one Turbo donks are a little less forgiving to ign timing discrepancies, so we`ve made a few "adjustments" to our design

we`ve also found that if the waste gate actuator hose pops off the diaphram that the turbo will boost well past 20lbs They go """REALLY""" fast then

_________________
No offence intended here but--> anyone writing a book about minis 30 years ago may not have experienced such worn or stuffed-with components as we are finding these days.

You should put your heart & soul into everything you do.

Hey PhatKat

yeah A+ box, all fully overhauled with cross-pin diff, lightened flywheel & steel back plate, full comp clutch plate, & grey diaphram that`s been "Re-designed" to give 1600lbs clamping pressure

I doubt the owner will drive it like i would tho

_________________
No offence intended here but--> anyone writing a book about minis 30 years ago may not have experienced such worn or stuffed-with components as we are finding these days.

You should put your heart & soul into everything you do.

There is nothing like a bit of free boosting to get the engine really working

_________________
If you want more inches, stroke it
Life's a garden.... Dig It!
http://www.ausmini.com/forums/viewtopic.php?t=20746