Has any got inertia seat belts on a round nose that doesnt hit the seat?

If so part No & from where?

Craig

_________________
1967 Morris Mini Deluxe
1927 Austin 7

I do, but don't have part number handy sorry. I believe they available from major retailers (minis plus, minisport etc).

Depends on what seats you have too probably! I have clubman seats, and clearance is very very close indeed.

_________________
tim
68 Deluxe 1293, HIF44, megajolt/EDIS4, daihatsu alternator..

'a mini is for life, not just for christmas!'

Craig, I used Klippan 1512. You have to redrill the reel mounting hole closer to the reel or the reel fouls on the door pocket.
I've run them for 10 years in my `70 Matic, no problem.
PM sent.

<edit> These belts cleared roundy seats, they also clear my Cobra Classics.
They do NOT clear Clubby seats which are wider in the base frame.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

I have inertia seat belts in mine too, with clubman seats.
LIke others the clearance is very close.
Personally I am a bit tired of it and prefer normal non-inertia seat belts.

_________________
1966 Morris Mini Deluxe
.... 4 bicycles and 3 screaming kids.