Waxed the paint.

Sooooooo shiney and slippery

_________________
Dean Hutton's first car was a Mini.

going to clean the 3 minis

_________________

Removed the Rovers top crash pad without removing windscreen.....a firm but gentle persuasion was the way to go

Also remove 90% of the lower pad cleanly too...

Spent a coupla hours scraping off all the old glue etc from inside our mini getting ready to primer her as per phat kahts directions.

nothing

_________________
120bhp with 450kg just fun waiting to happen

We were prob. drunk when we set it up last and thought this will be a good idea

finely collect my 1.3 rockers from the Dr for the wifes daily drive. Hope to put them on over the weekend. but I have a lot to do over the weekend...not just Mini related

_________________
Stop Licking the Dog...I Don't Care Who Started It

Drove clubman on the road for the first time after 12 months of resto and got compliments for our handmade dashboard

_________________
Scott

Cut out both front floor sides and welded in a new drivers side and tomorrow should have the passenger side in too.

Drove it to work, got followed by a Nuffy in a xr6, hit the corners and blew him to the weeds Why do they think they can out corner a MINI

Had the day off today, so finally got around to clearing out a bit of rust and fitting my KAD Quickstick.

What a difference from the standard remote change!

_________________
Too many cars, and too little time.

Well... At least he red one runs, secondhand head gasket and all.

However, the blue one STILL has oil pressure problems. Can't muster more than 45 pounds. Oil still aerated. We pulled the head off it just to make sure it was all cool - which it was, but now, even with a new BK450 gasket all torqued down nicely, it is leaking water out the entire front face of the gasket.

So not enough oil pressure, water leaking all over the shop, and air in the oil too. Makes for a very frustrating two days solid work.

WTF?

hooked up new indecator stork hooked up water bottle for windscreen wipers havent hooked up the nossles yet dunno how and cleaned my other car and the mini

_________________
1974 clubby with round nose conversion
1100 motor
extractors
twin 1 1/4" su's
lumpy cam (dunno what 1)
2 1/2" exaust
http://www.ausmini.com/forums/viewtopic ... sc&start=0

washed and detailed my 2 minis plus my MINI

_________________

I washed the Ramflo filter (Unifilter foam) out with turps, dried and oiled it.
Has done 11,000 miles, and a fair bit of stuff came out. Enough to convince me that air filters are worth having on a road car.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Bought an elbow for the heater off ebay and picked it up on the way home from work

_________________
David L


My greatest fear in life is that when I die my wife will sell my Mini and tools for the price I told her I paid for them!