Ausmini
It is currently Mon Aug 04, 2025 4:14 pm

All times are UTC + 10 hours




Post new topic Reply to topic  [ 35 posts ]  Go to page Previous  1, 2, 3  Next
Author Message
 Post subject:
PostPosted: Wed Oct 28, 2009 7:09 pm 
Offline
998cc
998cc
User avatar

Joined: Fri Jun 19, 2009 10:19 am
Posts: 666
Location: sydney
OK OK OK, didnt realise it was not all about welding type stories, because im the biggest clutz anyone will ever know.

Im 19 working on a construction site, 3 stories up installing hand rails(meant to stop people from falling right?). Some how I end up on the wrong side of the rail and I slip and fall the 3 stories, crapping myself for the whole millisecond that it takes to fall, then all of a sudden im on my feet on the ground squating, I think to myself, well this turned out better than I thought it would how the devil did I land on my feet? Then I try to stand up but im kind of stuck where I am? I look down between my feet and there is a piece of 18mm rio bar sticking up and it looks from my angle that im sitting square on it. Turns out that I was sitting on it, about 70mm deep right behind my blurter, Dr tells me another 2mm and it would have hit an artery and I would have been dead within the minute.

All in all, I was pretty sore for a long while after that, and I really learnt to appreciate the little safety caps they put on the end of rio.

_________________
ANY SEA ANY TIME


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 28, 2009 7:17 pm 
Offline
Mods rock!
User avatar

Joined: Fri Oct 03, 2008 9:02 pm
Posts: 5079
crazy bob wrote:
OK OK OK, didnt realise it was not all about welding type stories, because im the biggest clutz anyone will ever know.

Im 19 working on a construction site, 3 stories up installing hand rails(meant to stop people from falling right?). Some how I end up on the wrong side of the rail and I slip and fall the 3 stories, crapping myself for the whole millisecond that it takes to fall, then all of a sudden im on my feet on the ground squating, I think to myself, well this turned out better than I thought it would how the devil did I land on my feet? Then I try to stand up but im kind of stuck where I am? I look down between my feet and there is a piece of 18mm rio bar sticking up and it looks from my angle that im sitting square on it. Turns out that I was sitting on it, about 70mm deep right behind my blurter, Dr tells me another 2mm and it would have hit an artery and I would have been dead within the minute.

All in all, I was pretty sore for a long while after that, and I really learnt to appreciate the little safety caps they put on the end of rio.


That makes my blood run cold, how lucky are you?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 28, 2009 7:18 pm 
Offline
1098cc
1098cc
User avatar

Joined: Wed Aug 26, 2009 11:28 pm
Posts: 1550
crazy bob wrote:
OK OK OK, didnt realise it was not all about welding type stories, because im the biggest clutz anyone will ever know.

Im 19 working on a construction site, 3 stories up installing hand rails(meant to stop people from falling right?). Some how I end up on the wrong side of the rail and I slip and fall the 3 stories, crapping myself for the whole millisecond that it takes to fall, then all of a sudden im on my feet on the ground squating, I think to myself, well this turned out better than I thought it would how the devil did I land on my feet? Then I try to stand up but im kind of stuck where I am? I look down between my feet and there is a piece of 18mm rio bar sticking up and it looks from my angle that im sitting square on it. Turns out that I was sitting on it, about 70mm deep right behind my blurter, Dr tells me another 2mm and it would have hit an artery and I would have been dead within the minute.

All in all, I was pretty sore for a long while after that, and I really learnt to appreciate the little safety caps they put on the end of rio.


Farrrrrrrrkkkkkk!!!!! that takes the cake budy, well done.. get this man a prize,,, or maybe some lube for next time...

I thought I was bad for setting fire to my flesh but wow, I am lost for words :shock:


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 28, 2009 7:26 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sat May 02, 2009 4:53 pm
Posts: 3135
Location: Port Stephens, a little north of Newcastle, Australia
Yes, it made me feel quite ill thinking about it.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Oct 29, 2009 2:09 pm 
Offline
998cc
998cc
User avatar

Joined: Fri Jun 19, 2009 10:19 am
Posts: 666
Location: sydney
I have another story about me falling down from/with a ladder, and my whatsit lands between the ground and the ladder and then me on top of all that(im 2m tall and weigh about 140kg), but it makes the bum story sound lame and g rated, so I rarely even utter the story from my mouth.

I dont work on construction sites anymore. Employers insurance premiums have lower significantly as a biproduct :D

_________________
ANY SEA ANY TIME


Top
 Profile  
 
 Post subject:
PostPosted: Thu Oct 29, 2009 4:09 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sat May 02, 2009 4:53 pm
Posts: 3135
Location: Port Stephens, a little north of Newcastle, Australia
crazy bob wrote:

I dont work on construction sites anymore.

Probably the best decision you have made.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Oct 29, 2009 5:09 pm 
This May Get Modded but i have a mate who lost his front tooth, not from a bar fight or work accident but from "going the Growl" on his missus, she bucked and kneed him in the mouth. PHUNNY :lol:


Last edited by mini maxx on Thu Oct 29, 2009 6:20 pm, edited 1 time in total.

Top
  
 
 Post subject:
PostPosted: Thu Oct 29, 2009 5:22 pm 
Offline
998cc
998cc
User avatar

Joined: Fri Jun 19, 2009 10:19 am
Posts: 666
Location: sydney
sound like your mate really knows his job :lol:

_________________
ANY SEA ANY TIME


Top
 Profile  
 
 Post subject:
PostPosted: Thu Oct 29, 2009 6:09 pm 
crazy bob wrote:
sound like your mate really knows his job :lol:


Nah, he just gets too involved in his work :lol:


Top
  
 
 Post subject:
PostPosted: Thu Oct 29, 2009 6:18 pm 
Offline
Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19124
mini maxx wrote:
This May Get Modded but i have a mate who lost his front tooth, not from a bar fight or work accident but from performing felatio on his missus, she bucked and kneed him in the mouth. PHUNNY :lol:

It might not have been her "knee" 8)
http://www.urbandictionary.com/define.php?term=felatio :wink:


Top
 Profile  
 
 Post subject:
PostPosted: Thu Oct 29, 2009 6:19 pm 
Morris 1100 wrote:
mini maxx wrote:
This May Get Modded but i have a mate who lost his front tooth, not from a bar fight or work accident but from performing felatio on his missus, she bucked and kneed him in the mouth. PHUNNY :lol:

It might not have been her "knee" 8)
http://www.urbandictionary.com/define.php?term=felatio :wink:
Ok Mr precise i shall wander back and edit :roll:


Top
  
 
 Post subject:
PostPosted: Thu Oct 29, 2009 6:24 pm 
Offline
Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19124
Hey, if he wants to perform fellatio it is nothing to do with me.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Oct 29, 2009 6:25 pm 
:lol: :lol: :lol: :lol: :lol:


Top
  
 
 Post subject:
PostPosted: Thu Oct 29, 2009 6:29 pm 
Offline
Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19124
It might explain why his missus broke his teeth though.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Oct 30, 2009 7:26 am 
Offline
848cc
848cc

Joined: Wed Feb 25, 2009 7:22 am
Posts: 140
Location: Port Noarlunga, SA
Curly wrote:
I found out quite by accident :oops: that when you slice into your finger (through leather gloves, I might add) with one of those very thin cut-off wheels on an angle grinder, that it automatically cauterises the wound. No blood at all, still hurts though :shock:


Yup, done that and got a nice little scar to prove it :P Left a nasty mark on the bone too


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 35 posts ]  Go to page Previous  1, 2, 3  Next

All times are UTC + 10 hours


Who is online

Users browsing this forum: Bing [Bot], crisonic and 111 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.