Hi
Would the guy who took the Ken Elder head from my work shop on thursday please return it, just leave it at the door of my work shop or house one night or when ever and we'll leave it at that.
we know all the people that the heads have been sold to and have a number stamped on them, and don't machine the number off as it will be easy to see as the little spigit will be a lot thinner.
My work shop is open to any body as i trust the people that come here,maybe i should have a re think.
Graham Russell

_________________
"It's better to be not informed than ill-informed"

I hope they are smart enough to return it GR.

thats low.

Very bad this, as Graham says, he trusts us lot to just wander around, now this

Whoever you are; have a conscience and do the right thing

_________________
Sir Alec! we are not worthy!

very low...

it's a small world, if all the of clubs tell people to look out for it, it'll show up

What a low act!

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

head for a head I say. That is really poor form.

Where is Tiny these days?

Not exactly the sort of thing that you just slip in your pocket and walk off with...

_________________

http://www.youtube.com/user/Hanras

Geez how low (and dumb) would you be to do something like that

_________________
Lillee - 1969 Morris Mini K

Is it possible to get a register up? Then we can trawl eBay and if one pops up that isn't there we have an Ausmini lynch mob that can visit them and reclaim it.

_________________
Simplify and add lightness

Man that's low

I bet the selfish bastard wont be selling it, but putting it on their daily hack, probably f**king it up in the process

Hope it returns in the night.

cheers,

Jacob

_________________
'72 Clubman Van - 1022cc, 295 head, 731 cam - Daily Driver
'69 Morris 1100 S - Dinged by a bus, in shed under repair
'64 Morris 1100 - Early 1100, long term project

Hi
The silly thing about it is that we had only just started to modify it, it has no valve guides the seats have not been cut yet, so it's really only a bare head half finished.
Graham Russell

_________________
"It's better to be not informed than ill-informed"

Pleased you put it on here Graham, I was going to stick it on if you didn
You sounded PO'd today - hope it is returned

Dennis

well its good to know that he cant just slap it straight on his motor, he'll need to bring it to a shop to get done. put the word out to your contacts and it will be sure to turn up somewhere

dirty little low life...

It'll rock up GR... one head or another...

_________________
Here am I sitting in my tin can far above the Moon
Planet Earth is blue and there's nothing I can do...



“A turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.” - Jeremy Clarkson