Ausmini
It is currently Fri Jul 18, 2025 9:29 pm

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
Minimad
PostPosted: Thu May 20, 2010 9:29 pm 
Offline
848cc
848cc
User avatar

Joined: Fri May 21, 2004 2:47 pm
Posts: 440
Location: Brisbane, QLD Ausie
Are the hydro rear trailing arms the same as the rubber cone arms??

Interchangeable??

Minimad

_________________
You can take the boy out of the racer.........but not the racer out of the boy!
Top
 Profile  
 
GT mowog
 Post subject:
PostPosted: Thu May 20, 2010 9:31 pm 
Offline
Mods rock!
User avatar

Joined: Fri Oct 03, 2008 9:02 pm
Posts: 5079
No. They are different and not readily interchangable.

_________________
Image
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Thu May 20, 2010 9:32 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
Nope the position of the knuckle is different, also the brake pipe setup is different, and hydro arms have a bump stop on top.
Also the handbrake bellcrank pivot setup is a bit different.
That said, it is possible to use hydro arms in a dry racecar with hi-los, according to Justminis.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Minimad
 Post subject:
PostPosted: Thu May 20, 2010 9:36 pm 
Offline
848cc
848cc
User avatar

Joined: Fri May 21, 2004 2:47 pm
Posts: 440
Location: Brisbane, QLD Ausie
Thanks.. Won't bother keeping them :o

Minimad

_________________
You can take the boy out of the racer.........but not the racer out of the boy!
Top
 Profile  
 
1071
 Post subject:
PostPosted: Thu May 20, 2010 9:58 pm 
Offline
848cc
848cc

Joined: Tue Oct 18, 2005 11:32 am
Posts: 449
Location: Canberra ACT
As he said; a set of Hilos is all you need.

Cheers, Ian
Top
 Profile  
 
justminis
 Post subject:
PostPosted: Fri May 21, 2010 7:12 am 
Offline
998cc
998cc
User avatar

Joined: Fri Mar 26, 2004 8:44 pm
Posts: 1084
Location: Far North Queensland
Stub axle needs to be changed too, need a press, for the lower shock mount. Not the only way to do it tho.

_________________
Steve
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri May 21, 2010 8:41 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
justminis wrote:
Stub axle needs to be changed too, need a press, for the lower shock mount. Not the only way to do it tho.

You can cut it off flush then drill and tap 3/8 UNF for a high tensile bolt. Works even better with Koni shocks (can then adjust em on the car).

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 87 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.