As title suggests....

i know that they are available for 998's... or is it just as easy to get a set of 998's and 'lop some off the top'?

_________________
Here am I sitting in my tin can far above the Moon
Planet Earth is blue and there's nothing I can do...



“A turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.” - Jeremy Clarkson

Have GR's 0.100" flat tops in my 1098

_________________
David L


My greatest fear in life is that when I die my wife will sell my Mini and tools for the price I told her I paid for them!

Yes he does make +.100" 1098 ones, not sure of his stock levels..
I'd be wary lopping the tops of 998 ones- .148" has to come off, so the ring land land and crown is then thin. And the bottoms MAY hit on the crank unless you relieve them.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Hi
Yes i have .100tho over size for the 1100, you just have to turn down the dizzy shaft to clear the piston, which i do for people that buy the 1100 pistons.
Graham Russell

_________________
"It's better to be not informed than ill-informed"

Thanks guys.

Graham,
Will give you a call during the week

-Matt

_________________
Here am I sitting in my tin can far above the Moon
Planet Earth is blue and there's nothing I can do...



“A turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.” - Jeremy Clarkson