Ausmini
It is currently Fri Jul 18, 2025 4:44 pm

All times are UTC + 10 hours




Post new topic Reply to topic  [ 19 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: seat belt laws?
PostPosted: Mon Jun 14, 2004 8:48 pm 
Offline
1275cc
1275cc
User avatar

Joined: Tue Mar 16, 2004 9:12 pm
Posts: 5038
Location: cabramatta sydney
a while ago, i heard "you can have as many people in the car, just along all the seatbelts are used" - maybe this was a loophole in the law

my brother told me recently that theyve changed:
"you cant have more than the number of people than seatbelts in the car"

my mini has only 2 front seatbelts.
the car was made 36 years ago and out of the factory it has no rear seat belts.

am i going to have to look into getting rear seat belts?
thanks

_________________
Inconspicuously Conspicuous
Appreciation without Depreciation
forever chasing clearer skies...


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jun 14, 2004 9:01 pm 
Offline
848cc
848cc

Joined: Mon Mar 22, 2004 10:46 am
Posts: 327
Location: Sunshine Coast, QLD
I would have thought you can have as many people in the car as stated on the rego sticker?

I have a friend with a 850 with only front seat belts but it was roadworthied and registered as a 4 seater. they had no problems with no back seat belts..


Last edited by spathi on Mon Jun 14, 2004 9:02 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Mon Jun 14, 2004 9:01 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
I'm in the same boat. My car was built 3/70. Rear seatbelts were not mandatory until January 1971 or `72 so earlier Minis didn't have the anchors fitted.

I don't know the answer- but it gives me an excuse not to carry passengers in back. :lol:

There are all sorts of anomalies.
I rode in a Mustang last year that had front LAP belts, the owner reckons they are still legal... but if the fuzz drove by they'd think he had no belt on.

<edit> Cops in NSW are likely to pull you up if they see unbelted passengers. Might ping you for no seatbelts too...
Maybe you should just ask a copper nicely before you risk it.. :P

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 15, 2004 12:54 am 
Offline
1275cc
1275cc
User avatar

Joined: Tue Mar 16, 2004 9:12 pm
Posts: 5038
Location: cabramatta sydney
yep ill drop by the local Cabramatta Police Station one day and will ask them. such a nice bunch of blokes there... no smell of rats anywhere in Cabramatta

_________________
Inconspicuously Conspicuous
Appreciation without Depreciation
forever chasing clearer skies...


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 15, 2004 1:05 pm 
Offline
1275cc
1275cc
User avatar

Joined: Tue Jun 08, 2004 1:52 pm
Posts: 4434
Location: Melbourne, VIC.
The rule is that if a seat with a belt is vacant, passengers must use that seat. So if you have one passenger in pre-71 Mini sedan, they should sit in the front passenger seat. :)

From Jan 1969 you must have lap-sash belts in the front, and from Jan 71, lap sash in the back (except centre belts). There are no ADR regulations prior to Jan 69 requiring seat belts AT ALL. I used to drive a 1961 EK Holden Ute - no belts and quite legal!

Mokes are only required to have lap belts, as there is no place to mount the top bolt, unless you have a factory fitted cage, which was optional until the mid or late 70's.

_________________
Brett Nicholson
Greendale (near Ballan) VIC.
1971 Morris Mini Moke
1966 Austin Mini
1965 Morris Mini Traveller
1973 LR Series 3 88
2007 LR Freelander 2


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 15, 2004 4:28 pm 
Offline
teh admin God
teh admin God
User avatar

Joined: Sat Mar 20, 2004 12:25 pm
Posts: 3932
Location: Smitho, Tassie
As bnicho said im sure if your vehicle is made before 1969, you do not need belts, but if they are there, they have to be worn

_________________
Sir Namibian CAMEL of MONGOLIA !!!
Vrilen Snyson Racing: Finding us all a Vrilen
Asparagus: Experience the versatility


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 15, 2004 5:06 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
So I could run the `64 850 without belts?? :P

I doubt they would allow a new registration, as the mounts are all there...

Don't think I'd tempt fate again.. in `65, I nearly got killed in a Mini without belts.. :roll:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 15, 2004 5:55 pm 
Offline
1098cc
1098cc
User avatar

Joined: Tue Mar 16, 2004 7:23 pm
Posts: 1821
Location: TAS
i think its just what its registered as... like if its registered as a 5 seater u can seat 5 people, and so on.. i think. but yeah, they might have changed the laws so dont take my word for it, i was looking at the old rego papers of betsy, and she's a 5 seater! but 4 belts....

_________________
Image


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 15, 2004 7:20 pm 
Offline
1275cc
1275cc
User avatar

Joined: Tue Jun 08, 2004 1:52 pm
Posts: 4434
Location: Melbourne, VIC.
I agree - better to have belts! :) My EK got them after a few months use.

If you fit them yourself where there are not original fixings, eg: to the rear seat of a pre-71 Mini you are supposed to get an engineers inspection to declare them safe before you can legally use them! But most sensible RWC inspectors will pass them if you fit them properly with spreader plates etc. Copy the strengthening used in a Clubman and you will be safe.

With a Moke, you can only legally fit lap-sah belts if you use a factory rollbar. If the bar is an aftermarket or custom one, you are only supposed to use lap belts, or get an engineer's certificate. The thing is that there were maybe a dozen different companies supplying rollbars for Mokes as dealer fitment - so what is a factory bar now anyway!?! :x

"Of course it's a factory bar Mr RWC Inspector!!" 8)

_________________
Brett Nicholson
Greendale (near Ballan) VIC.
1971 Morris Mini Moke
1966 Austin Mini
1965 Morris Mini Traveller
1973 LR Series 3 88
2007 LR Freelander 2


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 16, 2004 5:43 pm 
Offline
998cc
998cc
User avatar

Joined: Tue Mar 16, 2004 4:53 pm
Posts: 743
Location: Townsville Nth QLD
blah blah blah ADR's. If there were no seat belts fitted out of the factory, and it passed ADR's of the time, it's fine. IF mounts have been made up, and approved, then the seat belts MUST be used. You cant take the seat belts out afterwards.

I have even seen an officer tell one guy that his daughter should be in the back seat of an XP Falcon. She was only about 8 years old. His reasoning was that she wasnt old enough to wear a lap sash seatbelt. He still believed she would be safer in the back seat without any seatbelt at all!!! :shock: :shock: GO FIGGER

_________________
"He's always been a dickhead, He always is a dickhead, He will always be a dickhead. So stop complaining when he acts like one."


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 16, 2004 5:47 pm 
Offline
1275cc
1275cc
User avatar

Joined: Tue Mar 16, 2004 10:34 am
Posts: 2067
Location: Canberra
My '65 Deluxe got through rego without ANY seatbelts. It is registered as a 4 seater. I believe technically although the mounts are there, the seatbelts were originally optional. Then again maybe the inspector was blind - the car had no mirrors either but he still passed it. I think he counted the number of wheels (which was 4 by the way, I had remembered to put them all back on) and passed it. Too easy!

Anto.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 16, 2004 11:06 pm 
Offline
1275cc
1275cc
User avatar

Joined: Tue Mar 16, 2004 9:12 pm
Posts: 5038
Location: cabramatta sydney
hahah
thats funny, my mini's blue slip said my car holds 5 people... must be a bigger car than yours Anto

this is getting to me... ill have to find out soon
there are so many "before the law changed" , "factory options" , "engineered alterations"
i guess no one can really answer the question about seat belts for the present law
thanks, will get back to you soon

_________________
Inconspicuously Conspicuous
Appreciation without Depreciation
forever chasing clearer skies...


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 19, 2004 11:24 am 
Offline
848cc
848cc
User avatar

Joined: Tue Mar 16, 2004 4:32 pm
Posts: 59
Location: Sunshine North, Melbourne
While I was living in Adelaide (in 2002) I read through the laws thoroughly because I often carried 4 people in my 2 seater mini van. As far as the south australian rules read, you could carry as many people in the car as you can fit, as long as all the seat belts are used, and people are carried in areas of the vehicle designed for carrying either people or goods. As I figure it, that means the only places you can't cram your mates in are the engine bay and under the wheel arches.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 19, 2004 11:38 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
After that bad accident on Mona Vale Rd a year or so ago, when an overloaded VW Golf spun out in the wet and killed two guys who were in the boot, the laws in NSW were changed. It is now illegal here to carry people in the boot, not that that is practical in a Mini..

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 19, 2004 12:53 pm 
Offline
998cc
998cc
User avatar

Joined: Tue Mar 16, 2004 4:53 pm
Posts: 743
Location: Townsville Nth QLD
Similar Laws were pased in the last year or so in QLD, after a ute rollover. So no more travelling in the tray of utes.

_________________
"He's always been a dickhead, He always is a dickhead, He will always be a dickhead. So stop complaining when he acts like one."


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 19 posts ]  Go to page 1, 2  Next

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 101 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.