so the windscreen wipers stopped working today. .
had a looky see, and the cable that connects the two wiperarms to the motor has snapped
what to do fellas. any idea s how to get that sorted, i'm still shocked it snapped.


mmmm MY lucky day forecasted showers for the next week

_________________
PrOuDlY aSkInG qUeStIoNs FoR uR aMuEsMeNt

Replace the cable.






And it might be a good idea to check the wheel boxes aren't jammed up too

_________________

what did you mean with reguards to the wheel boxes. just clogged up with dirt and that??

_________________
PrOuDlY aSkInG qUeStIoNs FoR uR aMuEsMeNt

The wheel boxes are the spindles that the wiper arms are mounted to. You'll most likely need to take these out to replace the cable anyway. The shaft within sometimes jams / siezes up in the fixed housing.

They can be pressed apart to clean & re-grease but if the thread on the outer housing is corroded you'll need new ones of these too.

_________________

thanks alot.. i;ll have a look and get stuck in .

_________________
PrOuDlY aSkInG qUeStIoNs FoR uR aMuEsMeNt

Your welcome

_________________