Let's see if anyone wants to do/has already done the work for me on this one.

The rebuild continues and I'm up to fitting the heater. Can anyone list the lengths and diameters of the various hoses I'll need to get and where to get them from? It's for a 78 Leyland and I need everything from the intake thingy in the engine bay to the heater then to the vents. There's the two windscreen vents and there'll be two vents for the car in the centre console too.

Thanks champion people.

_________________
Cheers, Matt

Don't be fooled, Gruhms is not my real name.

To avoid any confusion, I'm referring to the ducting for air, not the hoses for water. Still keen to hear of the best places to buy it.

_________________
Cheers, Matt

Don't be fooled, Gruhms is not my real name.

Drmini posted / recommended this mob recently!

http://www.purplepig.com.au/www/content ... 75&fid=782

I was going to give them a go when I need my ducting for the heater!

Cheers Shane

_________________
If it's not a Cooper S, the mini was designed to be modified!

I found PP's service very good. I only wanted 1/2 a metre of ducting to go from the freshair MiniMatic heater to the firewall, + a spare bit.
They had none in stock in Wetherill Pk, but next day it landed on my doorstep, all the way from Rocklea Qld!

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.