Hey guys,

Can anybody tell me where to get these pipes?

I need the big pipe for the bit under the guard going from the plastic duct to the inside of clubman, then from the inside to the actual heater.
The next pipe I need is to go from the heat to to the window vents in the dash. With the second pipe i'm hoping to get them to branch off and then connect them up to my centre console when I get round to making it so as well does anyone know where to get those eyeball vents?

Thanks guys

Rich

I bought ducting for my fresh air heater from http://www.purplepig.com.au/www/content ... 75&fid=782

Wasn't in stock at my local branch, but they cut and shipped 1/2 M overnight from Rocklea.
Great service...

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

So they do both the small pipes on side going from the heater to vents and also the big pipe I need that goes from under the guard?

Rich

Just measure the sizes you need, and compare them to the chart in link above ^^ I can't remember what the Clubby sizes are.

It's good ducting, much more durable than the original rubbish Leyland used.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Cool, thanks for the help!

Rich.