I need to replace a few seals and recall comments about some being a crap fit. Could yall let me know what and where the good rubbers are? Are the kits good or should i buy individually to get the goods. Cheers Anthony.

_________________
Dog Food! Most kids like it more than Broccoli.

There are two thicknesses in the rubbers. Sadly i dint know this in a resto job and ended up with the slam-to-shut version from minspares UK. When i bought some more recently I checked with MiniKing [Sydney] and I believe i have the thinner ones. Yet to try. Hope it helps.

_________________
..still waiting for the Italian Job sequel to see if the bus went down

I've bought from Mini King, Karcraft, and Heritage MG with no problems except the boot seal 2 years ago (original sponge type). 2 I bought were too hard, and it would have taken 3 people to shut the boot..
I got a soft one from Minisport SA that was more like the original and worked fine.
The other places may have the right ones now though.

Here's a pic of the soft original one, and the hard ones that don't fit-
http://minisport.com.au/prod505.htm

[edit] you can also buy door rubbers by the metre from Grippy Rubber and others. It is the same profile as an XD Falcon..

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

I got a set of door rubbers from Minisport, just weeks ago. Easy to fit, look good and not heavy on the budget.

Mike