Ausmini
It is currently Sat Aug 16, 2025 7:44 pm

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 3
  [ 33 posts ]  Go to page 1, 2, 3  Next
  Print view Previous topic | Next topic 
Author Message
cush
PostPosted: Fri Jun 01, 2012 12:59 pm 
Offline
THIS SPACE FOR RENT
User avatar

Joined: Wed Jun 09, 2004 3:35 pm
Posts: 11847
That's what Mini Spares calls it.

They appear to be around the 20 pounds mark over seas and that translates into 80 bucks here.

Is this too far gone, or can I salvage it? OR... are they available cheaper than $80 in Aus?

Image

Image

Image

_________________
Image


Last edited by cush on Sun Jul 08, 2012 7:41 pm, edited 1 time in total.

Top
 Profile  
 
poeee
 Post subject:
PostPosted: Fri Jun 01, 2012 1:36 pm 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
Not that I've had experience with these, but surely that looks salvageable?

_________________
Image
Top
 Profile  
 
66S
 Post subject:
PostPosted: Fri Jun 01, 2012 1:45 pm 
Offline
998cc
998cc

Joined: Wed Sep 13, 2006 7:26 am
Posts: 900
Location: Christchurch New Zealand
Replacements (made in England) are stainless steel, which is probably a better idea. The common problem is rust from the inside breaking through to the outside. If it's sound inside, it will probably replate successfully.

Another thing you should check is if they make the early multi hole version, like you have.

Al
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Jun 01, 2012 3:02 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW
You could get a few sets laser cut and folded from SS, won't cost a fortune. Then sell the spare sets to fund yours. 8)

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
cush
 Post subject:
PostPosted: Fri Jun 01, 2012 5:45 pm 
Offline
THIS SPACE FOR RENT
User avatar

Joined: Wed Jun 09, 2004 3:35 pm
Posts: 11847
From the SS?

_________________
Image
Top
 Profile  
 
flapper
PostPosted: Fri Jun 01, 2012 8:50 pm 
Offline
848cc
848cc
User avatar

Joined: Sun Mar 23, 2008 1:14 pm
Posts: 352
Location: Country Victoria
cush wrote:

Is this too far gone, or can I salvage it?


Have the one's in your photo's been scrubbed over with steel wool!! It is amazing what this can salvage!!

So I have be told, the new replacements do not fit or work very well, (we don't always believe what we are told), it would be better if you could find someone who has fitted a replacement slide successfully, before you buy one.
Top
 Profile  
 
AJ
PostPosted: Fri Jun 01, 2012 8:59 pm 
Offline
998cc
998cc
User avatar

Joined: Sun Sep 11, 2005 12:41 pm
Posts: 911
Location: Bunbury WA
cush wrote:
That's what Mini Spares calls it.

They appear to be around the 20 pounds mark over seas and that translates into 80 bucks here.

Is this too far gone, or can I salvage it? OR... are they available cheaper than $80 in Aus?

Image

Image

Image


20 pounds is about $32 at the current exchange rate ...............
Top
 Profile  
 
mickmini
PostPosted: Fri Jun 01, 2012 9:02 pm 
Offline
1275cc
1275cc
User avatar

Joined: Mon Apr 26, 2004 6:31 pm
Posts: 4663
Location: Sydney - strangely, I am glad of the sight of hills!!
AJ wrote:
cush wrote:
That's what Mini Spares calls it.

They appear to be around the 20 pounds mark over seas and that translates into 80 bucks here.

Is this too far gone, or can I salvage it? OR... are they available cheaper than $80 in Aus?


20 pounds is about $32 at the current exchange rate ...............


plus shipping :!:

_________________
the world is a book, and those who do not travel read only a page
66 Mini Minor sponsored by http://www.lifeonthehedge.com.au/ The Dog Harness Specialists
It was a pleasure ausmini. I'll miss all you misfits and reprobates ;-)
Top
 Profile  
 
Wingman
 Post subject:
PostPosted: Fri Jun 01, 2012 9:11 pm 
Offline
848cc
848cc

Joined: Tue Apr 27, 2010 3:31 pm
Posts: 151
Location: Canberra
cush wrote:
From the SS?


From Stainless Steel (I think thats what he means)

Wingman
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Jun 01, 2012 10:31 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW
Yep SS, aka S/S...
There are lots of places now that will laser cut and bend stuff cheap. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
cush
PostPosted: Sat Jun 02, 2012 6:12 pm 
Offline
THIS SPACE FOR RENT
User avatar

Joined: Wed Jun 09, 2004 3:35 pm
Posts: 11847
mickmini wrote:
AJ wrote:

20 pounds is about $32 at the current exchange rate ...............


plus shipping :!:


Now now, you two. I'm not starting a "buy local" thread.

_________________
Image


Last edited by cush on Sat Jun 02, 2012 6:15 pm, edited 1 time in total.

Top
 Profile  
 
cush
PostPosted: Sat Jun 02, 2012 6:14 pm 
Offline
THIS SPACE FOR RENT
User avatar

Joined: Wed Jun 09, 2004 3:35 pm
Posts: 11847
flapper wrote:
cush wrote:

Is this too far gone, or can I salvage it?


Have the one's in your photo's been scrubbed over with steel wool!! It is amazing what this can salvage!!

So I have be told, the new replacements do not fit or work very well, (we don't always believe what we are told), it would be better if you could find someone who has fitted a replacement slide successfully, before you buy one.


Cheers, I might try that.

_________________
Image
Top
 Profile  
 
Phat Kat
 Post subject:
PostPosted: Sat Jun 02, 2012 6:26 pm 
Offline
1098cc
1098cc
User avatar

Joined: Wed Aug 26, 2009 11:28 pm
Posts: 1550
Go to bunnings, buy some rust convertor (make sure its got phosphric acid in it) wipe it on with steel wool, wipe it on thick... leave it for 30min... wipe it down with metho and steel wool.

It will be clean, rust free and will take longer to rust next time.. Apart from surface rust yours look fine.
Top
 Profile  
 
cush
 Post subject:
PostPosted: Sat Jun 02, 2012 6:38 pm 
Offline
THIS SPACE FOR RENT
User avatar

Joined: Wed Jun 09, 2004 3:35 pm
Posts: 11847
Yeah cool.. cheers...

_________________
Image
Top
 Profile  
 
66S
 Post subject:
PostPosted: Tue Jun 05, 2012 5:53 am 
Offline
998cc
998cc

Joined: Wed Sep 13, 2006 7:26 am
Posts: 900
Location: Christchurch New Zealand
These strips are not a plain shape, they would have been made with a die so cannot simply be folded up. It would be quite a job to fabricate them.

Al
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 3
  [ 33 posts ]  Go to page 1, 2, 3  Next

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 258 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.