_________________
the world is a book, and those who do not travel read only a page
66 Mini Minor sponsored by http://www.lifeonthehedge.com.au/ The Dog Harness Specialists
It was a pleasure ausmini. I'll miss all you misfits and reprobates

Could always cut and shut it, and bend to suit.

That wouldn't be very difficult, but weld it well otherwise when you get all boy racer you'll snap it

_________________
You're so square
Baby I don't care

Cool, thanks for the link..
That is exactly what i want..
I a msg to that guy. https://www.facebook.com/JBFabrication
He said it will be about $45 delivered to brisbane..
I might see if my my mate can make one up for me cheaper...

Unless we can get a better price for a group buy ???

These are the ones
[/quote]

_________________
Tim
Dusk Blue
1964 850

Speedwell gearstick extension
http://www.minisport.com.au/prod982.htm

Just daisy chain the gearstick extensions together until you have the desired length

_________________
You're so square
Baby I don't care

Could always use a magic wand stick in a remote.

Haha, morris.... It's like you were reading my mind.. I have my wand gearstick off my original gearbox here.
Perfect!!!! I just need to bend it to the perfect spot, then cut off a bit if I need to.
Or just leave it long WRC style.
::

_________________
Tim
Dusk Blue
1964 850

I reckon sorting out a steering column with uni joints at each end so you can have the wheel at a different angle would be cool

Yea, that would be ideal.
But I don't reckon you need one on either end. I reckon you cut it right in the middle then put one there. So if you point it up as high as you can then bend it down just under the dash to as straight as you can to the steering wheel.... Perfect.

_________________
Tim
Dusk Blue
1964 850

The later versions of the Italian made Morris 1100 had a single uni joint in the column.

Ok, so where do I find one of those???
And I'm told that m1100 columns are longer than mini ones too, correct?

_________________
Tim
Dusk Blue
1964 850