I've been doing a search for certain queries here, but haven't gotten very far in some of these things. Mostly pretty stupid questions for sourcing parts AU vs UK.

Do the UK wipers fit a clubman?
Eg: like these: http://www.minisport.com/mini-spare-par ... S0563.html fit a 78 clubby?

My indicators aren't working, I can't hear the clicking of the flasher unit. Where is it (most likely) located?
Been trying to sort out the wiring up the back end so i can fit in the fuel tank but indicators are no go. No clicking from the flasher so i'm assuming it's a dead unit, fuse or bad indicator stalk. I have no idea where the flasher is and the two fuses I can see in the engine bay seem to be fine, I gave them a bit of a sand as well too get a better contact. Reading the haynes manual (which wiring diagram is for my car?? why is this so difficult lol) indicates that there should be more fuses which i haven't checked?

UK rubbers in Aus car?
I'm assuming the windscreen front and rear are the same.
Door to body seals?
Rear window seal?
http://www.minisport.com/mini-spare-par ... A8239.html Look rather different to
http://minisport.com.au/prod37.htm
I took out the rubbers ages ago so can't remember what they look like.

I don't have the front number plate holder. Who sells them? I can't find any! Do I just make one or does the number plate mount directly to it?

I'm sure I'll get more questions so I'll just keep them in this thread.
Thanks always guys.

Edit, another question already.
What nuts & bolts do I need to mount the bumpers ?
I'm assuming they're UNF so I'll have to order them.

_________________
1978 Leyland Clubman

I had this on my car recently and it was the flasher can itself, it was clicking away but not actually sending power to the lights, new flasher solved it.

_________________
Basil - 1978 Leyland Mini, Brooklands Green, bit of a bitsa, and a park brick in the boot.

Well I can't even hear the clicking...

_________________
1978 Leyland Clubman

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Great post tomtom , im sure to need these questions answered for my project aswell ..........

_________________
Project Pickles is ALIVE!!!!! Click Here!
Success is so much sweeter after the struggle

Sorted out the indicators, turned out to be a faulty unit. $20 later from autobarn and we're all golden.

Question though, why are the rear indicators twin filament? Is it supposed to be reverse lights too?

_________________
1978 Leyland Clubman

Yes. It has reversing lights.

But the reversing lights are orange cause it comes through the lens..?

_________________
1978 Leyland Clubman

Yes.
Back in 1971 they didn't have to be clear..
This was an easy way out (long before Altezza clear lenses became the flavour of the month)

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Mini King do carry an Australian made reproduction of the front number plate
bracket instock at present

_________________
" A Hundred Years From Now It will not Matter what my Bank Acount Was,
The Sort Of House I Lived in, Or The Kind Of Car I drove ... But The World May Be A Better Place
Because I was Once Important In The Life Of A Child"