Ausmini
It is currently Sat Jul 19, 2025 12:50 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
phillb
PostPosted: Fri Dec 21, 2012 9:33 am 
Offline
1275cc
1275cc
User avatar

Joined: Sat Jun 20, 2009 11:24 am
Posts: 2276
Location: Wollongong
Can someone please confirm that this is a cooper heatsheild as it has a bracket that I think is for the vac advance tube. See pic below

If you are interested in it please PM me. I would be interested in just a standard cooper s heatsheild to buy or swap.

The carbs and everything else with it appesrs to be cooper s.

Thanks

Image

_________________
Image
68 Morris Cooper S Mk1 (*ex 78 1275 LS 4th last built, 70 Morris 1500 OHC & 70 MiniMatic)
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Dec 21, 2012 9:40 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
Yes I believe that is a Cooper one. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Morris 1100
 Post subject:
PostPosted: Fri Dec 21, 2012 10:13 am 
Offline
Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19124
Yes, I agree, it is a Cooper one. I have one on my Morris 1100 at the moment.
Top
 Profile  
 
sitnlo62
 Post subject:
PostPosted: Fri Dec 21, 2012 3:25 pm 
Offline
998cc
998cc
User avatar

Joined: Tue Apr 11, 2006 8:15 am
Posts: 722
Location: Brisbane
That Heat shield was used right through the range Including Cooper S which did not use the Vacuum advance.
Just to be clear, Cooper S heat shields Did have that Bracket.
In fact, so did the Clubman GT which can be clearly seen in the GT enginre bay pic on page 64 of vthe Book Spotlight On Mini Minor Down Under.
Caption mistakedly says it is a Cooper s Engine Bay!!
Dave

_________________
Image
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Dec 21, 2012 4:07 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
O/T but related-
Note the Police Pack HS4 carbs on the Cooper S and Clubby GT did not use this shape heat shield, they had a 1 piece one.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
phillb
 Post subject:
PostPosted: Fri Dec 21, 2012 4:30 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sat Jun 20, 2009 11:24 am
Posts: 2276
Location: Wollongong
sitnlo62 wrote:
That Heat shield was used right through the range Including Cooper S which did not use the Vacuum advance.
Just to be clear, Cooper S heat shields Did have that Bracket.
In fact, so did the Clubman GT which can be clearly seen in the GT enginre bay pic on page 64 of vthe Book Spotlight On Mini Minor Down Under.
Caption mistakedly says it is a Cooper s Engine Bay!!
Dave


Ok well if thats true it kinda makes sense, absolutely everthing else that came with that setup was correct so it seemed odd to end up with a different shield.

I guess over the years many have just been replaced with sets without the bracket.

_________________
Image
68 Morris Cooper S Mk1 (*ex 78 1275 LS 4th last built, 70 Morris 1500 OHC & 70 MiniMatic)
Top
 Profile  
 
sitnlo62
 Post subject:
PostPosted: Fri Dec 21, 2012 6:12 pm 
Offline
998cc
998cc
User avatar

Joined: Tue Apr 11, 2006 8:15 am
Posts: 722
Location: Brisbane
drmini in aust wrote:
O/T but related-
Note the Police Pack HS4 carbs on the Cooper S and Clubby GT did not use this shape heat shield, they had a 1 piece one.


Correct, in fact it was an AH Sprite, MG Midget heat shield converted to suit 1 1/2 SU's on a mini...

Dave

_________________
Image
Top
 Profile  
 
phillb
 Post subject:
PostPosted: Fri Dec 21, 2012 9:15 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sat Jun 20, 2009 11:24 am
Posts: 2276
Location: Wollongong
sitnlo62 wrote:
drmini in aust wrote:
O/T but related-
Note the Police Pack HS4 carbs on the Cooper S and Clubby GT did not use this shape heat shield, they had a 1 piece one.


Correct, in fact it was an AH Sprite, MG Midget heat shield converted to suit 1 1/2 SU's on a mini...

Dave


What is actually the purpose of the bulbous section of the metal vac line when one is fitted to that bracket. Is it just shaped that way so the bracket can support it?

_________________
Image
68 Morris Cooper S Mk1 (*ex 78 1275 LS 4th last built, 70 Morris 1500 OHC & 70 MiniMatic)
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Dec 21, 2012 9:26 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
Nope, it's a fuel trap, to protect the diaphragm in the vac advance..

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
phillb
 Post subject:
PostPosted: Fri Dec 21, 2012 9:31 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sat Jun 20, 2009 11:24 am
Posts: 2276
Location: Wollongong
drmini in aust wrote:
Nope, it's a fuel trap, to protect the diaphragm in the vac advance..


Ah OK. Yeah it seemed a lot of fuss just to support a bit of tube.

Thanks for all the replys and help everyone.

_________________
Image
68 Morris Cooper S Mk1 (*ex 78 1275 LS 4th last built, 70 Morris 1500 OHC & 70 MiniMatic)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: Bing [Bot] and 105 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.