Ausmini
It is currently Sat Jun 21, 2025 12:37 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
Kennomini
 Post subject: Gearbox build?
PostPosted: Sat Jul 06, 2013 10:40 pm 
Offline
1275cc
1275cc
User avatar

Joined: Thu May 24, 2007 7:19 pm
Posts: 5370
Location: Yandina,Sunshine Coast,QLD
I have a four syncro remote gearbox housing, and gear set. It has a couple of damaged gears (snapped off teeth) on the laygear and on the 2nd or 3rd gear. Anyway can I fit a complete gear set from a four syncro rod change gearbox into the remote housing?
Are parts (gears) interchangeable?

_________________
Respect mine and I'll respect yours.
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Sat Jul 06, 2013 10:45 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39750
Location: near Baulkham Hills, NSW
All will fit, except reverse. It has the same tooth count but the fork slot is in a different place, so use your old one.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Kennomini
 Post subject:
PostPosted: Sat Jul 06, 2013 11:35 pm 
Offline
1275cc
1275cc
User avatar

Joined: Thu May 24, 2007 7:19 pm
Posts: 5370
Location: Yandina,Sunshine Coast,QLD
That's good news.
Where from and what brands are best for box bearings and thrust washers etc?

_________________
Respect mine and I'll respect yours.
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Sun Jul 07, 2013 8:44 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39750
Location: near Baulkham Hills, NSW
Kennomini wrote:
That's good news.
Where from and what brands are best for box bearings and thrust washers etc?

If you want all the gearbox bearings Karcraft does a kit, with or without the 2 diff ones. It saves you a few bucks.
Likewise they have the copper and (correct thickness) fibre washers for the diff.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Kennomini
 Post subject:
PostPosted: Sun Jul 07, 2013 8:44 pm 
Offline
1275cc
1275cc
User avatar

Joined: Thu May 24, 2007 7:19 pm
Posts: 5370
Location: Yandina,Sunshine Coast,QLD
I'm fitting a Quafie 36K ATB diff (pot joints), what diff bushes etc do I need?

_________________
Respect mine and I'll respect yours.
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Sun Jul 07, 2013 8:48 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39750
Location: near Baulkham Hills, NSW
Kennomini wrote:
I'm fitting a Quafie 36K ATB diff (pot joints), what diff bushes etc do I need?

None internally.
But the 2 side cover bushes are probably worn as usual, I would fit new ones.
Note these need machining to size after press fitting- boring them in a lathe is the best method, IMO.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 86 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.