Saw this on ebay http://www.ebay.com.au/itm/Mini-Morris- ... 46114391b3 looks cheap for at least the seven 1275 rods.
What do they normally sell for?
Personally I'd probably buy them if they were closer to me.

_________________
Respect mine and I'll respect yours.

scrap alloy is $1.20 kg

_________________
A good friend will come and bail you out of jail...but a true friend will be sitting next to you saying "Damn...that was fun!"

Looks like 7 small journal 1275 rods in there. Worth $$$

IMO S/small J 1275 conrods are worth ~$100-150 a set (4) in unknown condition.
You would then throw the old bolts and nuts away, check/resize the big ends, check for straightness and little end diameters. And balance them as a set.
$$$ adds up...

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

So it is agreed, worth more than scrap.

What crank are you using Ken??? small journal or large journal?

_________________
No offence intended here but--> anyone writing a book about minis 30 years ago may not have experienced such worn or stuffed-with components as we are finding these days.

You should put your heart & soul into everything you do.

I'm using a lrg J crank but it's ground down a bit (not really suitable for stroking anymore).

_________________
Respect mine and I'll respect yours.

But I do have another two 1275 blocks without cranks or rods.

_________________
Respect mine and I'll respect yours.

Thanks for heads up, I picked em up!

Want to do a deal ken?

_________________
Lillee - 1969 Morris Mini K

I was hoping someone on here would be able to buy them, like I said I would have got them but it was pick up only and it's a bit far away .

_________________
Respect mine and I'll respect yours.