Ausmini
It is currently Sat Jul 19, 2025 6:16 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 2 of 2
  [ 23 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
Phil 850
 Post subject: Re: Tyre Recommendation
PostPosted: Sat Jun 14, 2014 6:23 pm 
Offline
998cc
998cc

Joined: Fri Aug 30, 2013 8:59 pm
Posts: 1046
Location: Western Sydney
drmini in aust wrote:
The 10x4.5s are not safety rims, because the tyre beads would break on a wheel this small. Folks in USA regularly break beads when fitting to these wheels.
Tubes in tubeless tyres are more trouble than they are worth. If you put them in Yoko A008s they chafe on the internal ribbing, and blow.
As I found out.
Subsequently I never managed to roll a tubeless Yoko off a 10x5 Contessa wheel at Wakefield Pk enough to lose pressure, and I did try pretty hard.


Hi Kevin
Got my A008's fitted and they look pretty swish.
What tyre pressures should I use. It will mainly be a weekend driver.

Phil

_________________
Find a job you love and you will never have to go to work !
Top
 Profile  
 
drmini in aust
 Post subject: Re: Tyre Recommendation
PostPosted: Sat Jun 14, 2014 7:30 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
Cooper S back in the day ran 28psi front, 26psi rear. For road use I run 30f/28r with A008s on Contessa 10x5 wheels.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Phil 850
 Post subject: Re: Tyre Recommendation
PostPosted: Sat Jun 14, 2014 8:47 pm 
Offline
998cc
998cc

Joined: Fri Aug 30, 2013 8:59 pm
Posts: 1046
Location: Western Sydney
Thanks Kevin

_________________
Find a job you love and you will never have to go to work !
Top
 Profile  
 
Fishyoil
 Post subject: Re: Tyre Recommendation
PostPosted: Tue Sep 02, 2014 6:08 pm 
Offline
848cc
848cc
User avatar

Joined: Tue Jun 26, 2007 12:39 pm
Posts: 140
Got some A008's fitted on my contessa's today. The guy fitting the tyres noticed there wasn't a bead seat/channel ridge thingy on the rims and suggested that tubes be installed. I remembered reading this thread and the good ol' Docs suggestion to go without...

Hope to post some pics of my car using 2 hands one day Sir!
Top
 Profile  
 
willy
 Post subject: Re: Tyre Recommendation
PostPosted: Tue Sep 02, 2014 7:46 pm 
Offline
1360cc
1360cc

Joined: Mon May 03, 2004 6:46 pm
Posts: 13688
Location: ADL
Phil 850 wrote:
I also just ordered a set of Yokohama A008's from Gordon Levin in Emu Plains for $139 each but you only pay for three so it was $417 for the set, fitted and balanced.
They are happy to fit them to my Cooper S wheels without tubes even though they are not Safety rims.



I also went down this route.
Couldn't say no!

Image
Top
 Profile  
 
Mick
 Post subject: Re: Tyre Recommendation
PostPosted: Tue Sep 02, 2014 7:51 pm 
Offline
SooperDooperMiniCooper ExpertEngineering
User avatar

Joined: Fri Apr 29, 2005 9:46 am
Posts: 18887
Location: Under the bonnet son!
I love how those rosepetals pull up behind under the lip willy.

_________________
SooperDooperMiniCooperExpertEngineering

All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.
Top
 Profile  
 
willy
 Post subject: Re: Tyre Recommendation
PostPosted: Tue Sep 02, 2014 9:09 pm 
Offline
1360cc
1360cc

Joined: Mon May 03, 2004 6:46 pm
Posts: 13688
Location: ADL
Mick wrote:
I love how those rosepetals pull up behind under the lip willy.


Cheers Mick.
They were really the only option of a period alloy wheel which didn't require flares, short of going a Contessa.
Beauty of these is that the Cooper S disc brakes fit under the fronts too.
:mrgreen:
Top
 Profile  
 
Boostedmini
 Post subject: Re: Tyre Recommendation
PostPosted: Wed Sep 03, 2014 8:46 am 
Offline
998cc
998cc
User avatar

Joined: Thu Sep 23, 2004 2:24 pm
Posts: 1170
Location: Quakers Hill - Only the Hills
I have been running Dunlop Formula R's for a while now and love them. I will be up for 2 more soon so i hope you can still get them.

i have never tried a set of 32R's due to price and the Dunlops have been so great for around $130 last time i think 2 or so years ago from Garry's motorsport at Blacktown, they are a Dunlop Motorsport Tyre dealer

_________________
Image

100% Pure A Series Turbo
Morris - The Original RedBull Racing
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 23 posts ]  Go to page Previous  1, 2

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 103 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.