Ausmini
It is currently Tue Jul 22, 2025 11:09 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
Phil 850
 Post subject: door misalignment
PostPosted: Sun Apr 12, 2015 7:39 pm 
Offline
998cc
998cc

Joined: Fri Aug 30, 2013 8:59 pm
Posts: 1046
Location: Western Sydney
Now that my car is registered and driving well the things that I ignored previously are becoming annoying.
Both doors do not line up with the rear guards.
Image
I have adjusted the catches in as far as possible, and also the door guide.
Image
The catches are a little worn, about 1 to 2mm but this will not give me the 3 to 4mm that I need.
The lock tongues are not worn, so this is OK.
Here is the door seal that is fitted.
Image
Is this the right seal :|
Other than belting the seal mount around the door frame in :( what are my options :?

Phil

_________________
Find a job you love and you will never have to go to work !
Top
 Profile  
 
i got a mini
 Post subject: Re: door misalignment
PostPosted: Sun Apr 12, 2015 8:05 pm 
Offline
998cc
998cc
User avatar

Joined: Tue May 13, 2008 12:40 pm
Posts: 866
Location: Queensland
I have the same problem but I think mine is because I wind up doors on a 850 no idea :)
Top
 Profile  
 
Harley
 Post subject: Re: door misalignment
PostPosted: Sun Apr 12, 2015 8:37 pm 
Offline
1360cc
1360cc
User avatar

Joined: Mon Aug 23, 2004 10:07 pm
Posts: 10653
Location: SE Melbourne
Phil - your car is one of the best I've seen for door alignment.
Just leave it knowing many are worse! :lol:
Top
 Profile  
 
Phil 850
 Post subject: Re: door misalignment
PostPosted: Sun Apr 12, 2015 9:08 pm 
Offline
998cc
998cc

Joined: Fri Aug 30, 2013 8:59 pm
Posts: 1046
Location: Western Sydney
Thanks Harley
I just looked at the Minispares site and they suggest this
http://minispares.com/product/Classic/B ... 0to%20shop
This should cure the problem I have along with new catches. Maybe :|

_________________
Find a job you love and you will never have to go to work !
Top
 Profile  
 
motodevo
 Post subject: Re: door misalignment
PostPosted: Sun Apr 12, 2015 10:28 pm 
Offline
848cc
848cc

Joined: Sat Aug 23, 2014 4:47 pm
Posts: 71
Location: S.E. Melbourne
Could just remove the rubber seal on it now and see whether there is any difference, save you forking out on new swals that may not be actually needed
Top
 Profile  
 
Goldbrocade_62
 Post subject: Re: door misalignment
PostPosted: Mon Apr 13, 2015 1:06 am 
Offline
1098cc
1098cc

Joined: Mon Nov 06, 2006 8:54 pm
Posts: 1789
Location: Hunter NSW
Incorrect door seals sliding window seals are a smaller section Karcraft, minisport list them
Top
 Profile  
 
Phil 850
 Post subject: Re: door misalignment
PostPosted: Tue Apr 14, 2015 7:39 pm 
Offline
998cc
998cc

Joined: Fri Aug 30, 2013 8:59 pm
Posts: 1046
Location: Western Sydney
I have an 850 seal from minisport UK http://www.minisport.com/24a1351-seal-d ... mk1-2.html but it is a hard as :( ,way harder than the on currently on there.
Are there different versions of this seal. Needs to be a super soft one.

_________________
Find a job you love and you will never have to go to work !
Top
 Profile  
 
drmini in aust
 Post subject: Re: door misalignment
PostPosted: Tue Apr 14, 2015 8:14 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39755
Location: near Baulkham Hills, NSW
I'd try the 850 seals from Karcraft or minikingdomonline.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Phil 850
 Post subject: Re: door misalignment
PostPosted: Tue Apr 14, 2015 9:10 pm 
Offline
998cc
998cc

Joined: Fri Aug 30, 2013 8:59 pm
Posts: 1046
Location: Western Sydney
I might take my sample along and see if theirs is significantly softer.
The one I have from minisport UK is 24A1351. Minispares and minisport AU list the seal as XGA9934 ?

_________________
Find a job you love and you will never have to go to work !
Top
 Profile  
 
drmini in aust
 Post subject: Re: door misalignment
PostPosted: Tue Apr 14, 2015 10:04 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39755
Location: near Baulkham Hills, NSW
Kc lists it as XGA9934.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: Bing [Bot] and 68 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.