Ausmini
It is currently Sun Aug 03, 2025 3:27 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
rampage101
PostPosted: Mon Aug 08, 2005 8:36 pm 
Offline
998cc
998cc
User avatar

Joined: Wed Mar 17, 2004 8:52 am
Posts: 734
Location: NSW Australia
Well, after messing around with my engine lately, trying to get it started in the garage on the floor, it didn't really occur to me to check the engine number, as the block I got it from told me it was an 850 8) Well, as it turns out, its a 1098 with a 12G202 head. :twisted:

Got my pulsar dissy sorted, its a D4R85-15, got it all sorted and just gotta play around with timing and tuning. Seems pretty nice though and with a GT40R coil.

So now I have 2 1098 engines, one of which will eventually become a turbo build, I plan on just using the above running engine and stripping and fully rebuilding the other for the turbo.

I'm just so happy again!

ps. Thanks for the help with the dissy Doc.
Top
 Profile  
 
gafmo
 Post subject:
PostPosted: Mon Aug 08, 2005 10:41 pm 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
Just one thing with the GT40R coil...you will need to run a resistor with it..otherwise you will have trouble..I found this out the hard way

_________________
Stop Licking the Dog...I Don't Care Who Started It
Top
 Profile  
 
willy
 Post subject:
PostPosted: Mon Aug 08, 2005 10:46 pm 
Offline
1360cc
1360cc

Joined: Mon May 03, 2004 6:46 pm
Posts: 13688
Location: ADL
Nothin wrong with the ol' 202 head.
I've got a couple here, one of which i'm stripping down tomorrow and finding if its any good to start getting work done on or not

:D

PS... so they stamped the block with 850 numbers? :?
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Aug 08, 2005 10:46 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39762
Location: near Baulkham Hills, NSW
gafmo wrote:
Just one thing with the GT40R coil...you will need to run a resistor with it..otherwise you will have trouble..I found this out the hard way

NO, DO NOT use a ballast resistor with this coil on a Pulsar dizzy. Doesn't need it... :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
gafmo
 Post subject:
PostPosted: Mon Aug 08, 2005 10:52 pm 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
Sorry I forgot you were using a Pusar dizzy ..ME bad :oops:

_________________
Stop Licking the Dog...I Don't Care Who Started It
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Tue Aug 09, 2005 8:45 am 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
drmini in aust wrote:
gafmo wrote:
Just one thing with the GT40R coil...you will need to run a resistor with it..otherwise you will have trouble..I found this out the hard way

NO, DO NOT use a ballast resistor with this coil on a Pulsar dizzy. Doesn't need it... :wink:



Mine is there, but not hooked up...can I piss it off altogether?
Top
 Profile  
 
rampage101
 Post subject:
PostPosted: Tue Aug 09, 2005 9:06 am 
Offline
998cc
998cc
User avatar

Joined: Wed Mar 17, 2004 8:52 am
Posts: 734
Location: NSW Australia
May as well anton, its not needed as the Doc says (me = taking his word :) )
Top
 Profile  
 
Lillee
 Post subject:
PostPosted: Wed Aug 10, 2005 2:24 am 
Offline
1360cc
1360cc
User avatar

Joined: Tue Jun 01, 2004 3:41 pm
Posts: 6858
Location: Special Tuning Sydney
If it makes you feel any better, mine is still in too but not hooked up :wink: For originality purposes of course! :roll: :P

_________________
Lillee - 1969 Morris Mini K
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Wed Aug 10, 2005 6:46 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39762
Location: near Baulkham Hills, NSW
If you hook up with a ballast resistor up it will work, but you will get less voltage at the plugs..
I'd piss any ballast resistor off.
BTW I'm not talking about that little radio suppression capacitor that came on the Pulsar coil lead, but you can bin that too. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 78 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.