Ausmini
It is currently Mon Jul 28, 2025 6:58 pm

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
Gezo
 Post subject: Gearbox 22G190
PostPosted: Mon Aug 15, 2005 2:08 pm 
Offline
848cc
848cc

Joined: Mon Apr 19, 2004 4:58 pm
Posts: 340
Hi,
Does anybody know if Aus cars come out with a 22G190 gearbox. Are they the same/or similar gears as 22G333? Do they interchange with 22G333? What diff ratio did they have? Would they fit a 1275 motor. Are they a good gearbox.
Thanks
Top
 Profile  
 
Morris 1100
 Post subject:
PostPosted: Mon Aug 15, 2005 7:27 pm 
Offline
Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19124
From the Mini Kingdom catalogue (1998/99)

Quote:
Three speed syncromesh, Remote control type
gearbox this type of gearbox was first introduced in Australia on the MINI COOPER & the MINI DELUXE. The identifying numbers (Cast in case NOT STAMPED in case) for this type of gearbox are: 22A1288 ** 22A1522 ** 22G190 ** 22G333 ** 22G68


They are wrong when they call the box a three speed! :lol:
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Aug 15, 2005 7:33 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39757
Location: near Baulkham Hills, NSW
Morris 1100 wrote:
From the Mini Kingdom catalogue (1998/99)

Quote:
Three speed syncromesh, Remote control type
gearbox this type of gearbox was first introduced in Australia on the MINI COOPER & the MINI DELUXE. The identifying numbers (Cast in case NOT STAMPED in case) for this type of gearbox are: 22A1288 ** 22A1522 ** 22G190 ** 22G333 ** 22G68


They are wrong when they call the box a three speed! :lol:

According to my Mini car Clinic cattledog, the 22G190 was used on the 1071 and 970 Cooper S models.

I believe you could fit a 1275 on, box probably would need a bit of relieving to clear the rods- particularly if 1100S/1275LS type.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Gezo
 Post subject:
PostPosted: Mon Aug 15, 2005 9:37 pm 
Offline
848cc
848cc

Joined: Mon Apr 19, 2004 4:58 pm
Posts: 340
Hi,
If they are an early Cooper S gearbox, does anyone who if they are interchangable with
22G333 Cooper S gearbox internals.
Thanks
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Aug 15, 2005 9:54 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39757
Location: near Baulkham Hills, NSW
Gezo wrote:
Hi,
If they are an early Cooper S gearbox, does anyone who if they are interchangable with
22G333 Cooper S gearbox internals.
Thanks

Yes they took both the A form and B form Cooper (S) gears. according to my cattledog.

There was little physical difference inside all these early boxes- I put a set of 997 Cooper gears & synchros into an early 850 box (which had cone synchros) once. Then I butchered the front to clear 1100S rods... :shock:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
brickworx
 Post subject:
PostPosted: Tue Aug 16, 2005 12:26 am 
Offline
1275cc
1275cc
User avatar

Joined: Tue Dec 14, 2004 9:38 am
Posts: 2008
Location: Adelaide, South Australia
Go the full synchro....
less noise, easier first gear...
fits all engines without mods.

_________________
Miniworx Centre 0883741299
Sooperdooperminicooperexpertengineering
Online BMW Mini Shop
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Tue Aug 16, 2005 6:54 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39757
Location: near Baulkham Hills, NSW
brickworx wrote:
Go the full synchro....
less noise, easier first gear...
fits all engines without mods.

Hear hear... and it's stronger too. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Gezo
 Post subject:
PostPosted: Tue Aug 16, 2005 4:13 pm 
Offline
848cc
848cc

Joined: Mon Apr 19, 2004 4:58 pm
Posts: 340
Hi,
Thanks for your knowledge.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 91 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.