Ausmini
It is currently Sat Jul 19, 2025 4:39 pm

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 2
  [ 16 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
gafmo
 Post subject: Relay
PostPosted: Mon Sep 20, 2004 4:16 pm 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
When should i put one into the Electronics Eg:horn and why

_________________
Stop Licking the Dog...I Don't Care Who Started It
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Sep 20, 2004 4:46 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
Using a relay dramatically reduces the current thru the switchgear.You could put one in the horn circuit but a Mini horn draws bugger-all.
If you fit air horns they come with one.

Most worthwhile place to fit them, IMO is in the headlamp circuit. This saves you putting 12.5A thru the light switch and dipswitch (assuming 75W bulbs being used) and they will last MUCH longer. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
mini_me
 Post subject: relay
PostPosted: Mon Sep 20, 2004 4:57 pm 
Offline
848cc
848cc
User avatar

Joined: Fri Jul 30, 2004 4:48 pm
Posts: 226
Location: Sydney
you need to use a relay only when there is a high current draw.eg driving lights.
the normal mini horns do not need a relay but if your going to put air horns on then use a relay.
the reason a relay is used is that you use small gauge wiring from the switch to the relay then from relay to earth (20 guage wire) and then use larger wire (16 gauge) from fuse to relay and from relay to lights
Top
 Profile  
 
gafmo
 Post subject:
PostPosted: Mon Sep 20, 2004 5:58 pm 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
Did we have 20 Gauge wire in ours.
I pulled the front wireing loom out to day with a number of dody snips and tucks and a few fried wires from past owners. I'll have a search arond tomorrow for wire




Guess what else I found today my seats are welded in :twisted:

_________________
Stop Licking the Dog...I Don't Care Who Started It
Top
 Profile  
 
aaron
 Post subject:
PostPosted: Mon Sep 20, 2004 6:01 pm 
Offline
1275cc
1275cc
User avatar

Joined: Thu May 13, 2004 4:41 pm
Posts: 4418
Location: sydney
buy a new loom custom made, will cost about 300 or so
Top
 Profile  
 
gafmo
 Post subject:
PostPosted: Mon Sep 20, 2004 6:08 pm 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
If its the guys down south they said they could not help me

_________________
Stop Licking the Dog...I Don't Care Who Started It
Top
 Profile  
 
minimarc
 Post subject:
PostPosted: Mon Sep 20, 2004 6:13 pm 
Offline
848cc
848cc

Joined: Mon Jul 05, 2004 12:09 pm
Posts: 155
Location: Brisbane
fitting a relay unit on the headlights saves you having to buy a new dipper switch when the other one melts

_________________
Cheers
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Sep 20, 2004 7:00 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
minimarc wrote:
fitting a relay unit on the headlights saves you having to buy a new dipper switch when the other one melts


Dead right! :lol:
I've got a few dead/melted ones, from past Minis I owned.. :cry:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
minimarc
 Post subject:
PostPosted: Mon Sep 20, 2004 7:05 pm 
Offline
848cc
848cc

Joined: Mon Jul 05, 2004 12:09 pm
Posts: 155
Location: Brisbane
yeah and they are not cheap to replace also improves the lights get a relay on the lights and hi beams

_________________
Cheers
Top
 Profile  
 
gafmo
 Post subject:
PostPosted: Mon Sep 20, 2004 7:08 pm 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
Will do what about the Fuel Pump

_________________
Stop Licking the Dog...I Don't Care Who Started It
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Sep 20, 2004 7:09 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
From another thread somewhere-

Jaycar ones are pretty cheap but work OK.
I believe Hella do some nice plug-in ones.
I just got a `New Era' (Japanese) 30A double relay (with fuses in it) from Supercheap, $35.
Yeah they do cheap Chinese ones too. :shock:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
gafmo
 Post subject:
PostPosted: Mon Sep 20, 2004 7:12 pm 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
Saw that post re the New Era Relays that's what me think of them

_________________
Stop Licking the Dog...I Don't Care Who Started It
Top
 Profile  
 
aaron
 Post subject:
PostPosted: Mon Sep 20, 2004 7:15 pm 
Offline
1275cc
1275cc
User avatar

Joined: Thu May 13, 2004 4:41 pm
Posts: 4418
Location: sydney
http://www.vinwire.com.au/
These guys are up near Byron and have been told there work is good.
http://www.classicwiringlooms.com.au/
The mob i think you spoke to
http://www.mgspareparts.com.au
I heard they can get them too. Darren Burns Bought one there and it was a cloth wrapped number looked good and he said he got a good price.

Ring Around

Cheers

Aaron
Top
 Profile  
 
gafmo
 Post subject:
PostPosted: Mon Sep 20, 2004 10:09 pm 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
It was Vinwires.
To hard basket I may pop into Mg's tomorrow on my rounds. May pick something up in a pick and payless

_________________
Stop Licking the Dog...I Don't Care Who Started It
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Mon Sep 20, 2004 10:11 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
gafmo wrote:
Guess what else I found today my seats are welded in :twisted:


:lol: ....why would you?!?!?!?
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 16 posts ]  Go to page 1, 2  Next

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: watsupskip and 73 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.