Question... i jus got a GRE manifold for my HIF44 but there is a problem... there is no where to put a bracket to hold the accelerator cable in place?
does anyone have pic of one with a bracket? or do i even need the bracket?
thanks

I have a GR manifold and the cables go through a bracket that sits between the carby and the manifold. see pic.

Nothing is attached to the manifold.



Cheers

_________________
Simon
Daily Driver - Yellow Devil 76 Clubman
Restoration Project - Primer grey 66 Morris Mini Deluxe

where would i be able to get one of these brackets?

This is what you need.

Can get them from
www.minis.com.au
or
www.minisport.com.au

Pete

_________________
A recent study found the average Aussie walks about 900 miles a year
Another study found Aussies drink, on average, 22 gallons of alcohol a year
That means, on average, Australians get about 41 miles per gallon

Kind of makes you proud to be an AUSSIE

ok i got one but i dont see how the accel cable will be attached to it?

You also need a HIF style accelerator cable - I am sure others can be made to fit but the HIF one is just sooo easy.

It has a nylon end piece molded into which clips onto the throttle sandwhich bracket.

The HIF throttle cable is normally yellow as in the previous photo

use the standard Mini bracket, just as Simple Simon has done. Then you can use the same choke and accelerator cable. Simple really

_________________
Website: www.justanothermini.com

how much are those GR manifolds going for these days?

Around $200 I think.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.