i have a hotdog no mufflers at all

Not having a go at u buztoy... Though you do seem to know a lot about womens clothing!



If it helps at all, i have a single RC40 maniflow system (1 3/4) and don't find it excessively noisy at all. No dB readings though. Apparently the 2 muffler systems make more hp...

i was drunk and bored when i wrote that,

_________________
any parts for a 76 clubby pm me or ring 0405 329 326

http://www.ausmini.com/forums/viewtopic.php?t=44717

hey i was just wondering if the Mini RC40 twin muffler setup (with con pipe) from minisport will fit on standard clubman extractors or will i need to purchase new extractors?

thanks

stock exstractors/cast iron boat anchors ones, if you didn't want to replace the extractors then you can have a shop make a pipe to go inbetwwn where they would meet up,

_________________
any parts for a 76 clubby pm me or ring 0405 329 326

http://www.ausmini.com/forums/viewtopic.php?t=44717

so the connecting pipe wont connect straight onto the existing extractors?

pics is what we need and another person, im not dr exhaust

_________________
any parts for a 76 clubby pm me or ring 0405 329 326

http://www.ausmini.com/forums/viewtopic.php?t=44717

There is no such thing as standard Clubman extractors. They all (apart from GT) had 1 carby and a cast exhaust manifold.

Waste of time IMO just putting a big 1-3/4 pipe and RC40 on that- unless you already have real extractors, buy some first.

A 3 into 1 is quieter than an LCB, also is less hassle to remove and refit.
The bit of pipe from extractors to the RC40 can be supplied by any exhaust shop. It's 1-3/4" OD exhaust pipe, Just measure up what you need.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.