Ausmini
It is currently Fri Aug 01, 2025 11:33 pm

All times are UTC + 10 hours




Post new topic Reply to topic  [ 23 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Wed Jul 15, 2009 2:43 pm 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
I'm bout to invest in a set of ratchet/geared spanner set (7pce). I've roughly priced up a kincrome set at work, and will do the same in a sec for sidchrome. Both have a 5deg/72tooth design.

Any advice?

I like sidchrome stuff... so if prices are pretty comparable i'd be going sidchrome.

_________________
Image


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 15, 2009 2:58 pm 
Offline
848cc
848cc

Joined: Wed Feb 25, 2009 7:22 am
Posts: 140
Location: Port Noarlunga, SA
I use sidchrome at work, admittedly i didnt pay for them so price didnt worry me, but they go good.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 15, 2009 3:04 pm 
Offline
848cc
848cc

Joined: Sun Nov 06, 2005 11:41 am
Posts: 192
Location: Melbourne
I use Bluepoint, Kincrome, TTI and Powerbuilt ratchet spanners on a daily basis,out of the three I like the Kincrome ones the best, as they have the smallest size head, making them good for confined spaces. Also they have a nice positive 'feel' to them (although that might just be in my head!)

Have had a few problems with the Bluepoint ones, swapped about 3 under warranty. No problems with any of the others.

Sorry, haven't used the Sidchrome ones, so not sure on them.

Andrew


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 15, 2009 3:07 pm 
Offline
1360cc
1360cc
User avatar

Joined: Thu Feb 03, 2005 1:41 pm
Posts: 12311
Location: Rockingham - Collie WA
I have a set of the Kinchrome ratchet stubby spanners (combination style)
Had them about 4 years, no problems except #1 son lost one :x

Only drawback is the thickness around the ratchet end - get whichever brand is thinner!

_________________
Too many cars, and too little time.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 15, 2009 4:14 pm 
Offline
Tomboss Breweros
User avatar

Joined: Wed Dec 31, 2008 9:57 pm
Posts: 7514
Location: Causing mayhem in northern rAdelaide
I heard theres a place in brissy that sells good ones :wink:

Gearwrench ones are my pick.

_________________
Dean Hutton's first car was a Mini.

kimini wrote:
:mrgreen: It's the boobs and testosterone that make this place fun-ner :lol: !!

Jimmyinamini wrote:
It's not nice to throw spank on the floor.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 15, 2009 5:43 pm 
Offline
998cc
998cc

Joined: Tue Sep 06, 2005 1:26 pm
Posts: 817
Location: Adelaide
I recently bought a Kincrome reversible spanner set that is both metric and AF and covers 17 sizes which you change by swapping socket heads. It cost $79 reduced from $142 at Gasweld in Hurtle Square. Well made, properlver switch to change direction and very innovative design.

_________________
Slide
1965 Mini Van (1360)
1970 Mk2 Cooper S (1310)
1978 Rover SD1 V8 (4.6)
1996 Land Rover Discovery V8 (4.0)


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 15, 2009 6:39 pm 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15912
Location: Wodonga - Vic/NSW border
awdmoke wrote:
I have a set of the Kinchrome ratchet stubby spanners (combination style)
Had them about 4 years, no problems except #1 son lost one :x

Only drawback is the thickness around the ratchet end - get whichever brand is thinner!


I've got the same set - they're lovely to use, but I often bump the little direction toggle switch while using them... that's a bit annoying

slide wrote:
I recently bought a Kincrome reversible spanner set that is both metric and AF and covers 17 sizes which you change by swapping socket heads.


is that like a cross between a socket and a spanner? IE the handle is a bit like a spanner, and you put a hollow socket into it

I've got a set like that, awesome to use, but it usually stays in the cupboard, somehow it didn't make it into my "regular use" tools

_________________
did I tell you that I won a trophy?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 15, 2009 7:13 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39762
Location: near Baulkham Hills, NSW
I have a set of Gearwrench ones. Well made, but- don't buy the straight ones (no offset) that you have to turn over to reverse. They just do not fit in most places when needed.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 15, 2009 7:20 pm 
Offline
1098cc
1098cc
User avatar

Joined: Tue Oct 18, 2005 6:40 am
Posts: 1943
Location: New Zealand (whangarei)
i have a powerbuilt set, loving them.

_________________
speed costs....how fast do you want to go...


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 15, 2009 9:00 pm 
Offline
848cc
848cc

Joined: Tue Oct 18, 2005 11:32 am
Posts: 449
Location: Canberra ACT
Sears Craftsman :) and you can get neat little hex headed sockets to match - which I find myself using more often than not.

Cheers, Ian


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 15, 2009 9:24 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sun Jan 21, 2007 9:16 pm
Posts: 3166
Location: North of the Harbour planning my next mini project
I have a Kincrome set and they are great. Wish I had them years ago. But they appear to have only recently been invented.

_________________
1969 Cooper "S"
1967 Mini Deluxe
1973 Clubman Van (the fleet spare)
1978 ex 1275 LS ("Wizard" Eaton Supercharged) :)
2015 HSV GenF GTS(occasional drive & tow car)
2019 MINI F55 Cooper S


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 15, 2009 10:07 pm 
Offline
1098cc
1098cc
User avatar

Joined: Tue Aug 05, 2008 8:03 pm
Posts: 1479
Location: Qld, Brisbane
michaelb wrote:
I have a Kincrome set and they are great. Wish I had them years ago. But they appear to have only recently been invented.


I think they might have been around for quite some time. My boss has a few scattered about the workshop which look as old as me. That might be exaggerating but ill take a guess and say 10-15 years old.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 15, 2009 10:34 pm 
Offline
998cc
998cc
User avatar

Joined: Sun Jun 11, 2006 2:15 pm
Posts: 604
Location: caboolture qld
i have 2 sets of kincrome ratchet spanners had them for about 5 years never had a problem with them but try not to use them on really tight nuts or bolt's as that can damage them.

cheers dan

_________________
Cheers Dan

FIRST COMES THE MONEY, THEN COMES THE POWER, THEN COMES THE WOMEN.!!


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 15, 2009 10:47 pm 
Offline
ET 13.457 seconds , OH YEAH !!!!
User avatar

Joined: Sun Sep 19, 2004 8:35 am
Posts: 7826
Location: Somewhere Around Sydney
+1 vote for kincrome 8)

They come in varying shapes and sizes. stubby ones with the flexible neck are handy.

_________________
Image
Starlet Conversion:
http://www.ausmini.com/forums/viewtopic.php?t=15484


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 15, 2009 11:22 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sat Apr 14, 2007 8:34 pm
Posts: 3415
Location: Cowra
i have a set of kincrome but they have the flexi head. So those spots where the normal bent spanner wont fit you just bend the head a bit more lock it into place and then ratchet away. To change direction you shift head over the other way.

I think these these are much better then the solid state non-flexi head ones allows access to many more places

_________________
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 23 posts ]  Go to page 1, 2  Next

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 96 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.