hi i have replaced my front wheel cylinders , bled all , adjusted and i still dont have a pedal till the last little bit there is also a couple of drops of brake fluid below the brake pedal so am i right in thinking the problem could be with the master cylinder ?? is there anything else i should try before i replace the the master cylinder??

cheers jarrad

If its leaking inside the car then its a master cylinder issue and you will never get pressure until its repaired

Kiwiinwgtn

ok i will replace it and then see how i go .

http://www.ausmini.com/forums/viewtopic ... ht=#665620

Try first

Steve

_________________
"Boris" - '69 Cooper S Mk 2