Ausmini
It is currently Mon Aug 18, 2025 3:10 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
jb007
PostPosted: Wed May 05, 2010 1:01 pm 
Offline
998cc
998cc
User avatar

Joined: Fri Feb 13, 2009 10:11 am
Posts: 848
Location: Hoppers Crossing
Hi All.
What are the correct screws to use to hold the MKI steering column shroud on? Where can I get some?
My very old column was just held on by a couple of self tappers at the top, and insulation tape at the bottom! So I would like to get it right this time.

_________________
'68 Morris Mini 1310 A+ (Now Sold!)
Top
 Profile  
 
Timbo
 Post subject:
PostPosted: Wed May 05, 2010 1:16 pm 
Offline
1098cc
1098cc
User avatar

Joined: Mon Sep 12, 2005 11:48 pm
Posts: 1842
Location: Hobart, Tasmania
A couple of self tappers. Little short ones with just the right diameter. I'm not sure but they may have been black originally, all the ones I ever see are rusty.

Tim

_________________
1951 Morris Commercial J Type Van
1955 BSA C11G
1961 Morris Mini Traveller
1969 Triumph TR6R
1977 Leyland Moke Californian
Top
 Profile  
 
jb007
 Post subject:
PostPosted: Wed May 05, 2010 1:26 pm 
Offline
998cc
998cc
User avatar

Joined: Fri Feb 13, 2009 10:11 am
Posts: 848
Location: Hoppers Crossing
Thanks for your help Timbo, I wasn't sure if the little ones were a machine thread or self tapper. I'll see if autobarn etc have any black ones.

Jim

_________________
'68 Morris Mini 1310 A+ (Now Sold!)
Top
 Profile  
 
Timbo
 Post subject:
PostPosted: Wed May 05, 2010 1:32 pm 
Offline
1098cc
1098cc
User avatar

Joined: Mon Sep 12, 2005 11:48 pm
Posts: 1842
Location: Hobart, Tasmania
Had a look in the parts manual, the two numbers are different but seem to work out to be something like 6 gauge self tappers with a pozidrive pan head and ether 1/4" long or .325", and zinc plated. Black ones probably look better though.

Tim

_________________
1951 Morris Commercial J Type Van
1955 BSA C11G
1961 Morris Mini Traveller
1969 Triumph TR6R
1977 Leyland Moke Californian
Top
 Profile  
 
jb007
 Post subject:
PostPosted: Wed May 05, 2010 1:36 pm 
Offline
998cc
998cc
User avatar

Joined: Fri Feb 13, 2009 10:11 am
Posts: 848
Location: Hoppers Crossing
Timbo wrote:
Had a look in the parts manual, the two numbers are different but seem to work out to be something like 6 gauge self tappers with a pozidrive pan head and ether 1/4" long or .325", and zinc plated. Black ones probably look better though.

Tim


Thanks Tim. I'll check out Autobarn or Bunnings... if I can't get black, I'll use a indelible black marker pen! :lol:

Jim

_________________
'68 Morris Mini 1310 A+ (Now Sold!)
Top
 Profile  
 
Mick
 Post subject:
PostPosted: Wed May 05, 2010 1:42 pm 
Offline
SooperDooperMiniCooper ExpertEngineering
User avatar

Joined: Fri Apr 29, 2005 9:46 am
Posts: 18888
Location: Under the bonnet son!
The correct self tappers are still available. Last time I dropped into The Mini King he had two wooden boxes full of the longer and shorter of the small self tappers. I grabbed a metric handful of both. I notice you're very nearby, if you're really keen to grab a couple drop me a PM.

_________________
SooperDooperMiniCooperExpertEngineering

All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.
Top
 Profile  
 
simon k
 Post subject:
PostPosted: Wed May 05, 2010 1:56 pm 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15912
Location: Wodonga - Vic/NSW border
jb007 wrote:
What are the correct screws to use to hold the MKI steering column shroud on? Where can I get some?


jb007 wrote:
I'll check out Autobarn or Bunnings... if I can't get black, I'll use a indelible black marker pen! :lol:


you can't ask for "correct" then go to autobarn or bunnings!! nooo!!! wrong!!! bad!!!
Top
 Profile  
 
jb007
 Post subject:
PostPosted: Wed May 05, 2010 2:08 pm 
Offline
998cc
998cc
User avatar

Joined: Fri Feb 13, 2009 10:11 am
Posts: 848
Location: Hoppers Crossing
simon k wrote:
jb007 wrote:
What are the correct screws to use to hold the MKI steering column shroud on? Where can I get some?


jb007 wrote:
I'll check out Autobarn or Bunnings... if I can't get black, I'll use a indelible black marker pen! :lol:


you can't ask for "correct" then go to autobarn or bunnings!! nooo!!! wrong!!! bad!!!


Sorry, my bad! :oops:


Jim

edit: removed PM reference, wrong person

_________________
'68 Morris Mini 1310 A+ (Now Sold!)
Top
 Profile  
 
John Smidt
 Post subject:
PostPosted: Wed May 05, 2010 8:31 pm 
Offline
The Mini King
User avatar

Joined: Mon May 21, 2007 7:20 pm
Posts: 1338
Location: Windsor, NSW
From Memory, The Top Screw was Chrome Plated and The Bottom Screw Zinc Plated The Top Screw Usually oxidized Before The Bottom Screw, This Is From Memory Only

_________________
" A Hundred Years From Now It will not Matter what my Bank Acount Was,
The Sort Of House I Lived in, Or The Kind Of Car I drove ... But The World May Be A Better Place
Because I was Once Important In The Life Of A Child"
Top
 Profile  
 
66S
 Post subject:
PostPosted: Thu May 06, 2010 6:30 am 
Offline
998cc
998cc

Joined: Wed Sep 13, 2006 7:26 am
Posts: 900
Location: Christchurch New Zealand
On UK built cars, they are chrome finished and Philips head.

Regards
Al
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 272 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.