Ausmini
It is currently Thu Jun 19, 2025 11:54 pm

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours




Post new topic Reply to topic  Page 4 of 4
  [ 55 posts ]  Go to page Previous  1, 2, 3, 4
  Print view Previous topic | Next topic 
Author Message
Cooper_Matrikon
 Post subject:
PostPosted: Sat Sep 25, 2010 7:34 am 
Offline
998cc
998cc
User avatar

Joined: Thu Jul 28, 2005 10:17 am
Posts: 1130
Location: Newcastle
Anyone?

_________________
http://www.rylstoneclassic.com
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Sun Sep 26, 2010 3:52 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39750
Location: near Baulkham Hills, NSW
Cooper_Matrikon wrote:
These are the options Doc...

August Catalogue...

EXTRACTORS - 3 INT0 1 - MINI (MANIFLOW UK)(RACE) KC103
EXTRACTORS - 3 INT0 1 - MINI (SUPA PIPE) KC308
EXTRACTORS - FREE FLOW - MINI KC307
EXTRACTORS - FREE FLOW - MINI (MANIFLOW UK) C-STR816
EXTRACTORS - LCB - MINI KC314
EXTRACTORS - LCB - MINI (MANIFLOW UK) C-AEG365 2

Yep take the bottom one mate. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Cooper_Matrikon
 Post subject:
PostPosted: Mon Sep 27, 2010 4:43 am 
Offline
998cc
998cc
User avatar

Joined: Thu Jul 28, 2005 10:17 am
Posts: 1130
Location: Newcastle
Thanks Doc.

_________________
http://www.rylstoneclassic.com
Top
 Profile  
 
Cooper_Matrikon
 Post subject:
PostPosted: Thu Oct 28, 2010 11:00 am 
Offline
998cc
998cc
User avatar

Joined: Thu Jul 28, 2005 10:17 am
Posts: 1130
Location: Newcastle
I'm about to go and grab a couple of front brake hoses from Parts and Panels here in Mayfield. Old mate is telling me he's got mandrel bent LCBs that are big bore. Is this overkill? Will they fit my car?

_________________
http://www.rylstoneclassic.com
Top
 Profile  
 
Cooper_Matrikon
 Post subject:
PostPosted: Thu Oct 28, 2010 12:16 pm 
Offline
998cc
998cc
User avatar

Joined: Thu Jul 28, 2005 10:17 am
Posts: 1130
Location: Newcastle
Purchased. OD is 1 7/8 with advice that I can flare the 1 3/4 pipe at the end. Should I have it welded together>

_________________
http://www.rylstoneclassic.com
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Thu Oct 28, 2010 1:34 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39750
Location: near Baulkham Hills, NSW
I'd not weld it, but flare the main pipe out if you want. But they will work just fine with the 1-3/4 pipe shoved inside and clamped.
My 1310 was fine to 8000 rpm like that. 8)

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Cooper_Matrikon
 Post subject:
PostPosted: Thu Oct 28, 2010 1:35 pm 
Offline
998cc
998cc
User avatar

Joined: Thu Jul 28, 2005 10:17 am
Posts: 1130
Location: Newcastle
Excellent. I'll have some video up when it's all done.

_________________
http://www.rylstoneclassic.com
Top
 Profile  
 
Cooper_Matrikon
 Post subject:
PostPosted: Wed Nov 10, 2010 5:13 pm 
Offline
998cc
998cc
User avatar

Joined: Thu Jul 28, 2005 10:17 am
Posts: 1130
Location: Newcastle
LCBs fitted. Back from a dynotune. 61 ponies and sounds as a Cooper S should. Very, very happy!

_________________
http://www.rylstoneclassic.com
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Wed Nov 10, 2010 6:14 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39750
Location: near Baulkham Hills, NSW
Cooper_Matrikon wrote:
LCBs fitted. Back from a dynotune. 61 ponies and sounds as a Cooper S should. Very, very happy!


Well done. That's a couple more in the corral, here's his last one, with the Perry freeflow and RC40-
The bottom trace is A/F ratio, it was a bit rich down low.

Image

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
AEG163job
 Post subject:
PostPosted: Wed Nov 10, 2010 8:26 pm 
Offline
1275cc
1275cc
User avatar

Joined: Fri Oct 20, 2006 5:03 pm
Posts: 2729
Location: Out in the shed cleaning up my own mess.
Cooper_Matrikon wrote:
LCBs fitted. Back from a dynotune. 61 ponies and sounds as a Cooper S should. Very, very happy!


Cool. The neighbours will know when your'e arriving home! :twisted:

_________________
1967 Cooper S - new front bearings to do.
1965 Cooper S shell - Slow progress. No time or money!
1966 Deluxe- next rustoration!
Mk 2 & XJ6 Jags. Less said the better.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 4 of 4
  [ 55 posts ]  Go to page Previous  1, 2, 3, 4

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 16 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.