Ausmini
It is currently Sat Jul 19, 2025 3:54 am

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Print view Previous topic | Next topic 
Author Message
graham in aus
 Post subject: Pistons Identification ?
PostPosted: Tue Feb 01, 2011 10:44 pm 
Offline
1098cc
1098cc
User avatar

Joined: Thu Jul 15, 2004 9:53 pm
Posts: 1768
Location: Lake Macquarie NSW
Are these anything special, RP2266 .040

Top 0025 OB

Repco?

Is it me or should 'top' be on the other side, like front?

This is cylinder No 4:

Image

Any good? 8)

_________________
Sir Alec! we are not worthy!
Top
 Profile  
 
Goldbrocade_62
 Post subject:
PostPosted: Wed Feb 02, 2011 2:47 pm 
Offline
1098cc
1098cc

Joined: Mon Nov 06, 2006 8:54 pm
Posts: 1789
Location: Hunter NSW
Can't help you with pistons but this is how the moke project started remember
Top
 Profile  
 
graham in aus
 Post subject:
PostPosted: Wed Feb 02, 2011 2:54 pm 
Offline
1098cc
1098cc
User avatar

Joined: Thu Jul 15, 2004 9:53 pm
Posts: 1768
Location: Lake Macquarie NSW
Yes well?

Not busy are you! :lol:

Probably give you a call........

:lol: 8) :lol: 8)

_________________
Sir Alec! we are not worthy!
Top
 Profile  
 
TheMiniMan
 Post subject:
PostPosted: Wed Feb 02, 2011 4:09 pm 
Offline
Bimmer Twinky
User avatar

Joined: Mon Sep 06, 2004 4:36 pm
Posts: 8606
Location: Brisbane
yep, repco

_________________
No offence intended here but--> anyone writing a book about minis 30 years ago may not have experienced such worn or stuffed-with components as we are finding these days.

You should put your heart & soul into everything you do.
Top
 Profile  
 
graham in aus
 Post subject:
PostPosted: Wed Feb 02, 2011 5:48 pm 
Offline
1098cc
1098cc
User avatar

Joined: Thu Jul 15, 2004 9:53 pm
Posts: 1768
Location: Lake Macquarie NSW
Thanks Matt, what about the 'Top' notation?

Can you fit a piston backwards, would it make much difference?

I realise pistons aren't round, but i would have thought the oval was across the pin to help with thrust load?

Hmmmmnnn ?? :?

_________________
Sir Alec! we are not worthy!
Top
 Profile  
 
SuperCooper
 Post subject:
PostPosted: Wed Feb 02, 2011 6:26 pm 
Offline
998cc
998cc
User avatar

Joined: Mon Feb 05, 2007 10:53 pm
Posts: 658
Location: NSW
Hows the head look?

_________________
Now with 2 extra ports!
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Wed Feb 02, 2011 6:36 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
graham in aus wrote:
Thanks Matt, what about the 'Top' notation?

Can you fit a piston backwards, would it make much difference?

I realise pistons aren't round, but i would have thought the oval was across the pin to help with thrust load?

Hmmmmnnn ?? :?

1275 pistons are symmetrical, 1098s are not- they have the gudgeon pin offset.
Sooooooo, watch which way round for these, but on a 1275 it don't matter.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
simon k
 Post subject:
PostPosted: Wed Feb 02, 2011 9:34 pm 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15912
Location: Wodonga - Vic/NSW border
you're not planning on re-using them though are you?
Top
 Profile  
 
MiniKit
 Post subject:
PostPosted: Wed Feb 02, 2011 10:24 pm 
Offline
998cc
998cc
User avatar

Joined: Sat Jan 03, 2009 10:26 pm
Posts: 550
Location: Perth, Western Australia
So it's not stating which way up they go..... :lol:

Sorry, I couldn't help myself....
Top
 Profile  
 
graham in aus
 Post subject:
PostPosted: Thu Feb 03, 2011 12:51 pm 
Offline
1098cc
1098cc
User avatar

Joined: Thu Jul 15, 2004 9:53 pm
Posts: 1768
Location: Lake Macquarie NSW
SuperCooper wrote:
Hows the head look?


simon k wrote:
you're not planning on re-using them though are you?


This is one of my spare 9F/XE/Y Motors, bought condition unknown a while ago, the guy said the head had been 'done up' recently. The bores are good, no lip and the head is indeed a very servicable 12G1805 Mk2 S head.

I'm procrastinating about pulling the head on the original Engine in the Mk2, it blows smoke on start up, and I can see oil on top of the pistons. Hoping its just the head :?

But, once the head is off, who knows ! :shock: :lol:

Short term fix would be to just swap the short motors if the bores turn out to be worn in the S. :x

Then theres the diff, a bit of play there too.....Grrrr Bl#ody Mini's :lol:

8)

_________________
Sir Alec! we are not worthy!
Top
 Profile  
 
simon k
 Post subject:
PostPosted: Thu Feb 03, 2011 8:53 pm 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15912
Location: Wodonga - Vic/NSW border
graham in aus wrote:
I'm procrastinating about pulling the head on the original Engine in the Mk2, it blows smoke on start up, and I can see oil on top of the pistons. Hoping its just the head :?


it's gotta be just the head, but as soon as you do the head up all the fresh compression will mean it'll blow past the rings :lol:
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 16 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.