Ausmini
It is currently Thu Aug 07, 2025 1:13 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 
  Print view Previous topic | Next topic 
Author Message
Fiji
 Post subject: Temp sender adaptor
PostPosted: Fri Jun 24, 2011 7:37 pm 
Offline
1098cc
1098cc

Joined: Mon Jul 10, 2006 5:59 pm
Posts: 1275
Location: Bris / Syd
Changing my mechanical temp gauge to electrical 1275 block.

Image

I had a look around struggling to find an adaptor from block to suit my electric sender.

Part : SMITT6811-01 1/8"

I could probably cut a thread at work into the smaller adaptor bush in pic to fit the sender but is there a single bush that would do the trick from the block to sender?

_________________
PrOuDlY aSkInG qUeStIoNs FoR uR aMuEsMeNt
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Jun 24, 2011 7:47 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW
If you post me the sender I will make you one.
The thread in the head is 5/8-18 UNF.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
GT mowog
 Post subject:
PostPosted: Fri Jun 24, 2011 7:56 pm 
Offline
Mods rock!
User avatar

Joined: Fri Oct 03, 2008 9:02 pm
Posts: 5079
drmini in aust wrote:
If you post me the sender I will make you one.
The thread in the head is 5/8-18 UNF.


The thread on his new sender is 1/8" 27 NPT.

_________________
Image
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Jun 24, 2011 8:00 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW
I said before- (I have that tap, give me dimensions needed or a sketch and I will make and post).

[edit] I can make from a 3/8 or 1/2 BSP brass hex plug, dimensions not needed now.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Last edited by drmini in aust on Fri Jun 24, 2011 8:06 pm, edited 2 times in total.

Top
 Profile  
 
EST-071
 Post subject:
PostPosted: Fri Jun 24, 2011 8:02 pm 
Offline
1098cc
1098cc
User avatar

Joined: Tue Jan 11, 2005 9:07 pm
Posts: 1336
Location: Emu Plains, NSW
GT mowog wrote:
drmini in aust wrote:
If you post me the sender I will make you one.
The thread in the head is 5/8-18 UNF.


The thread on his new sender is 1/8" 27 NPT.

If you can I would like 2 of them as well.
Cheers Pete

_________________
A recent study found the average Aussie walks about 900 miles a year
Another study found Aussies drink, on average, 22 gallons of alcohol a year
That means, on average, Australians get about 41 miles per gallon

Kind of makes you proud to be an AUSSIE
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Jun 24, 2011 8:05 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW
I'll knock some up early next week.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Fiji
 Post subject:
PostPosted: Fri Jun 24, 2011 8:34 pm 
Offline
1098cc
1098cc

Joined: Mon Jul 10, 2006 5:59 pm
Posts: 1275
Location: Bris / Syd
Thanks Doc. Pm sent

Solid work GT

Cheers. Sean

_________________
PrOuDlY aSkInG qUeStIoNs FoR uR aMuEsMeNt
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Jun 27, 2011 9:15 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW
Guys I've got the 3 hex brass plugs, will machine them on Thursday (aka Mini machine shop day). :P

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
CPOCSM
 Post subject:
PostPosted: Tue Jun 28, 2011 7:34 pm 
Offline
1275cc
1275cc
User avatar

Joined: Fri Aug 13, 2004 3:45 am
Posts: 2360
Location: SE QLD
I will take one also Doc if there are any left... :D

_________________
Rob Forsyth
Miniot!!
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Tue Jun 28, 2011 7:53 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW
CPOCSM wrote:
I will take one also Doc if there are any left... :D

No problem.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Wombat
 Post subject:
PostPosted: Wed Jun 29, 2011 10:05 am 
Offline
1360cc
1360cc
User avatar

Joined: Mon Jul 26, 2004 7:23 am
Posts: 7339
Location: Sunny Shine Coast, Qld Australia
Is 5/8-18 UNF standard bolt size/thread? - need a blanking bit for my extra thermostat hole

_________________
David L
Image

My greatest fear in life is that when I die my wife will sell my Mini and tools for the price I told her I paid for them!
Top
 Profile  
 
GT mowog
 Post subject:
PostPosted: Wed Jun 29, 2011 10:24 am 
Offline
Mods rock!
User avatar

Joined: Fri Oct 03, 2008 9:02 pm
Posts: 5079
Wombat wrote:
Is 5/8-18 UNF standard bolt size/thread? - need a blanking bit for my extra thermostat hole


Yes. It is just 'ordinary' 5/8" UNF. the '-18' bit is the threads per inch. If your fitting a steel bolt, grease it to slow the rusting / corrosion.

_________________
Image
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Jul 01, 2011 5:00 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW
OK guys these 4 are in the mail, if anybody else wants one made too, $12 ea including post.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
DTrain
 Post subject:
PostPosted: Mon Jul 04, 2011 10:21 pm 
Offline
998cc
998cc

Joined: Sat Jan 07, 2006 11:52 pm
Posts: 966
Location: Bald Hills, Brisbane
will send you a pm when i get home doc, im in need of an adapter of slightly different nature
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 84 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.