Ausmini
It is currently Mon Jun 30, 2025 6:07 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 2
  [ 16 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
SuperCooper
 Post subject: SCCR gbox. Mmmmm!
PostPosted: Fri Feb 10, 2012 4:58 pm 
Offline
998cc
998cc
User avatar

Joined: Mon Feb 05, 2007 10:53 pm
Posts: 658
Location: NSW
Mmmmmm! My new SCCR Gbox for my MK II S.
3.9 4pin diff, central oil pick, blasted case. Wish I could have build it, but trusted it to Miniclassic. Thanks Grieg.

Image
Image
Image

_________________
Now with 2 extra ports!
Top
 Profile  
 
douglas42l2
 Post subject: Gearbox
PostPosted: Fri Feb 10, 2012 5:40 pm 
Offline
848cc
848cc

Joined: Mon Aug 10, 2009 5:17 pm
Posts: 67
Must have cost a fortune !
Top
 Profile  
 
SuperCooper
 Post subject:
PostPosted: Fri Feb 10, 2012 5:47 pm 
Offline
998cc
998cc
User avatar

Joined: Mon Feb 05, 2007 10:53 pm
Posts: 658
Location: NSW
I Supplied all but a few parts from uk, Guessworks and min-its.
So it worked out not too bad. Did it in stages too, not all at once.
Straight cut drops and Quaife diff would have been nice but more $$$$!

_________________
Now with 2 extra ports!
Top
 Profile  
 
graham in aus
 Post subject:
PostPosted: Fri Feb 10, 2012 7:03 pm 
Offline
1098cc
1098cc
User avatar

Joined: Thu Jul 15, 2004 9:53 pm
Posts: 1768
Location: Lake Macquarie NSW
Hi Super, defo worth the extra for the blasting.....

Noice! :P :P

_________________
Sir Alec! we are not worthy!
Top
 Profile  
 
SuperCooper
 Post subject:
PostPosted: Fri Feb 10, 2012 7:15 pm 
Offline
998cc
998cc
User avatar

Joined: Mon Feb 05, 2007 10:53 pm
Posts: 658
Location: NSW
Yeah I can't believe how well the outside has come up. More impressed with inside though!

_________________
Now with 2 extra ports!
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Feb 10, 2012 7:19 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39752
Location: near Baulkham Hills, NSW
Grumble grumble.. (envy) I have a s/h SCCR gearset here, perhaps I should get a round tuit and stick it in a case then. 8) :lol:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
SuperCooper
 Post subject:
PostPosted: Fri Feb 10, 2012 7:28 pm 
Offline
998cc
998cc
User avatar

Joined: Mon Feb 05, 2007 10:53 pm
Posts: 658
Location: NSW
Yeah duit! Then put it under your 1360!

_________________
Now with 2 extra ports!
Top
 Profile  
 
justminis
 Post subject:
PostPosted: Fri Feb 10, 2012 8:10 pm 
Offline
998cc
998cc
User avatar

Joined: Fri Mar 26, 2004 8:44 pm
Posts: 1084
Location: Far North Queensland
Yum! Good to see its finally together and, that it is inside the house and not out in the garage :D

And they look so good when the case has been blasted. I do all mine now, now that I have the big arse 3 phase air compressor :shock:

_________________
Steve
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Feb 10, 2012 8:22 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39752
Location: near Baulkham Hills, NSW
SuperCooper wrote:
Yeah duit! Then put it under your 1360!

Don't think so, I prefer S ratios in a road car... particularly if it's a daily.
Besides, I wouldn't hear the CDs... :P
I'll probably either sell the gearset or put it in a box and sell the lot.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Drewie
 Post subject:
PostPosted: Fri Feb 10, 2012 8:24 pm 
Offline
848cc
848cc
User avatar

Joined: Fri Apr 16, 2010 10:36 pm
Posts: 262
Location: Melbourne
I had a set of straight cuts in my road going 1969 Cooper S back in the 70's, fantastic bit of equipment. One of the best mods I ever did at the time, I was a lot younger then, maybe today it might be a different story.

Just looking at the old receipt from 1970 it cost me $218.75 for the parts and $55 in labour for the box. And I got $50 trade in for my old S box.
Top
 Profile  
 
coopar
 Post subject:
PostPosted: Fri Feb 10, 2012 9:27 pm 
Offline
848cc
848cc
User avatar

Joined: Tue Apr 05, 2011 9:48 pm
Posts: 464
Location: Gisborne VIC
Jealous

_________________
Tim
Top
 Profile  
 
SuperCooper
 Post subject:
PostPosted: Fri Feb 10, 2012 9:45 pm 
Offline
998cc
998cc
User avatar

Joined: Mon Feb 05, 2007 10:53 pm
Posts: 658
Location: NSW
Drewie wrote:
I had a set of straight cuts in my road going 1969 Cooper S back in the 70's, fantastic bit of equipment. One of the best mods I ever did at the time, I was a lot younger then, maybe today it might be a different story.

Just looking at the old receipt from 1970 it cost me $218.75 for the parts and $55 in labour for the box. And I got $50 trade in for my old S box.

Wish that was today's prices!

_________________
Now with 2 extra ports!
Top
 Profile  
 
Sydney Minis
 Post subject:
PostPosted: Sat Feb 11, 2012 10:22 pm 
Offline
848cc
848cc
User avatar

Joined: Mon Feb 28, 2011 7:15 am
Posts: 128
Location: Sydney
I love my straight cuts, one of my favourite sounds!

_________________
www.facebook.com/sydneyminis
www.facebook.com/miniowners
www.sydneyminis.com
1969 Morris Mini K- 1380cc for driving
1969 Morris Mini K Panel Van- 1098 for loads
1971 Morris Mini K Panel Van- Still in the barn
2000 Rover Mayfair- Luxury
Top
 Profile  
 
Cooper_Matrikon
 Post subject:
PostPosted: Sun Feb 12, 2012 7:29 am 
Offline
998cc
998cc
User avatar

Joined: Thu Jul 28, 2005 10:17 am
Posts: 1130
Location: Newcastle
drmini in aust wrote:
SuperCooper wrote:
Yeah duit! Then put it under your 1360!

Don't think so, I prefer S ratios in a road car... particularly if it's a daily.
Besides, I wouldn't hear the CDs... :P
I'll probably either sell the gearset or put it in a box and sell the lot.


First dibs! It would only be fitting to find their way into Barney.

_________________
http://www.rylstoneclassic.com
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Feb 13, 2012 6:30 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39752
Location: near Baulkham Hills, NSW
My 4 synchro SCCR gearset is now sold pending payment.
It is going to be kept as spares for the same racecar it came out of, years ago. This car has changed hands twice since.
Talk about a small world.. :lol: :shock:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 16 posts ]  Go to page 1, 2  Next

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 87 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.