Hey everyone,

I'm struggling getting the last bolt in of my new rear adjustable camber brackets. I can't seem to get the arm down far enough to get the top bolt in.

Is there a trick to it? Do I need to deflate the hydro? (I have a pump so I don't mind letting it down).

This seems like a common mod for minis and I have no idea how people get past this point!

Any suggestions would be appreciated.

Thanks, Nick

_________________
"In two years time your car will be like a lady's clothes, out of date, my car will still be in fashion when I am dead" - Sir Alec speaking to Pininfarina

I presume you are talking about the rears. Sometimes you might have to elongate the holes to make it easier, otherwise you will damage the thread and that will be a problem..

_________________
DID I MENTION THAT I AM THE BEST SUPPLIER FOR MINI ELECTRICAL PARTS AND REPAIRS?
"Let us remove your "SHORTS"

Nick, I did mine a couple of weeks ago. Luckily dad helped out he was able move the arm using a lever, to get it in just the right place for me to put the bolt in. Two man job made it easier.
EDIT: No I didn't let the hydro down either.

remove the other bolts and check that the holes do actually line up properly

then use a pry bar between the arm and the subframe

_________________
did I tell you that I won a trophy?

yeah quite often those brackets don`t have the holes in the right places & need a bit of a mod

& yes also you`ll need a bit of a lever to get it all to line up

_________________
No offence intended here but--> anyone writing a book about minis 30 years ago may not have experienced such worn or stuffed-with components as we are finding these days.

You should put your heart & soul into everything you do.

oops, double de-bug post

_________________
No offence intended here but--> anyone writing a book about minis 30 years ago may not have experienced such worn or stuffed-with components as we are finding these days.

You should put your heart & soul into everything you do.

oops trippple de-bug post

_________________
No offence intended here but--> anyone writing a book about minis 30 years ago may not have experienced such worn or stuffed-with components as we are finding these days.

You should put your heart & soul into everything you do.

I hope that's a finger/brain stutter Matt, not a palpitation!