ausmini • View topic - Stripped thread on hub

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Stripped thread on hub

Moderators: winabbey, simon k, poeee, Mick

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

peterw

Post subject: Stripped thread on hub

Posted: Tue Mar 03, 2009 12:00 pm

848cc

Joined: Tue Feb 20, 2007 12:44 pm
Posts: 396
Location: Sydney

I have a disc brake hub with a stripped thread where the bottom ball joint screws on. Anyone successfully repaired one like this?

Pete

Top

drmini in aust

Post subject:

Posted: Tue Mar 03, 2009 12:04 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW

Toss it away, they are cast iron. NOT steel...

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

tinymorris1969

Post subject:

Posted: Tue Mar 03, 2009 9:02 pm

I is a mookenik

Joined: Wed Feb 07, 2007 6:46 pm
Posts: 3471
Location: sydney

lol i repaired mine last nite

just get a thread file and it should be 20mm then just start filing a new thread. worked for me and its good as new.

_________________
oil leak?..what oil leak..that puddle under the car is just sweat from all that horsepower

Top

sgc

Post subject:

Posted: Tue Mar 03, 2009 9:08 pm

This space for rent

Joined: Thu Feb 08, 2007 12:40 pm
Posts: 5455
Location: Melbourne

tinymorris1969 wrote:

lol i repaired mine last nite

just get a thread file and it should be 20mm then just start filing a new thread. worked for me and its good as new.

Not the balljoint pin Joe, the actual hub itself, where the big 1-1/2" inch nut screws down. Like Doc says, if that's stuffed the hub is stuffed...

_________________
Simon

The adventures of an owner builder in the Tallarook Ranges

Top

tinymorris1969

Post subject:

Posted: Tue Mar 03, 2009 9:10 pm

I is a mookenik

Joined: Wed Feb 07, 2007 6:46 pm
Posts: 3471
Location: sydney

ohhhh dam yep ur screwd...

_________________
oil leak?..what oil leak..that puddle under the car is just sweat from all that horsepower

Top

sports850

Post subject:

Posted: Tue Mar 03, 2009 9:10 pm

Postally Verbose

Joined: Mon Jan 02, 2006 9:12 am
Posts: 19595
Location: Northern NSW

Joe , two different things , you were talking about the end of the ball joint where the nut screws on weren't you ? Peter is talking about the thread on the hub where the ball joint cup screws onto . If the threads damaged on the hub the ball joint can seperate from the hub under load (read that as in a hard corner) and fold the wheel up under the guard so isn't worth fiddling with .

_________________

Top

tinymorris1969

Post subject:

Posted: Tue Mar 03, 2009 9:12 pm

I is a mookenik

Joined: Wed Feb 07, 2007 6:46 pm
Posts: 3471
Location: sydney

yeah i thought he was talking about the balljoint stud itself lol.

_________________
oil leak?..what oil leak..that puddle under the car is just sweat from all that horsepower

Top

peterw

Post subject:

Posted: Tue Mar 03, 2009 10:25 pm

848cc

Joined: Tue Feb 20, 2007 12:44 pm
Posts: 396
Location: Sydney

I figured it was toast. Just thought I would ask in case someone smarter than me had found a way to fix one.

Thanks for the confirmation.

Pete

Top

Page 1 of 1

[ 8 posts ]

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Who is online

Users browsing this forum: Bing [Bot] and 388 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: