ausmini • View topic - Things that make you go HMMM!!!!!!

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Things that make you go HMMM!!!!!!

Moderators: winabbey, simon k, poeee, Mick

Page 2 of 3

[ 36 posts ]

Go to page Previous 1, 2, 3 Next

Print view

Previous topic | Next topic

Author

Message

littleminik

Post subject:

Posted: Thu Feb 18, 2010 7:02 pm

848cc

Joined: Wed Dec 30, 2009 4:17 pm
Posts: 37
Location: NSW, Australia

That engine and head does not look good at all!!

_________________
1970 Mini K

Top

justminis

Post subject:

Posted: Thu Feb 18, 2010 8:54 pm

998cc

Joined: Fri Mar 26, 2004 8:44 pm
Posts: 1084
Location: Far North Queensland

Here's my effort, and yes that is the head of the inlet valve in the top of the piston.

_________________
Steve

Top

littleminik

Post subject:

Posted: Mon Feb 22, 2010 9:18 pm

848cc

Joined: Wed Dec 30, 2009 4:17 pm
Posts: 37
Location: NSW, Australia

ahh not good, how was the crank and block after that effort?

_________________
1970 Mini K

Top

headgasket

Post subject:

Posted: Mon Feb 22, 2010 10:07 pm

848cc

Joined: Thu Feb 14, 2008 3:25 pm
Posts: 258
Location: Bathurst, NSW

Holy crap... how does damage like this occur?!

_________________
Copper 4 lyfe!

Top

justminis

Post subject:

Posted: Tue Feb 23, 2010 3:16 am

998cc

Joined: Fri Mar 26, 2004 8:44 pm
Posts: 1084
Location: Far North Queensland

Crank was fine and block cleaned up at next oversize. Due to dropped valve, due to broken roller pin in the roller rocker :shock:

_________________
Steve

Top

Benyni

Post subject: Thats Awesome!

Posted: Tue Feb 23, 2010 4:04 pm

848cc

Joined: Wed Apr 22, 2009 7:41 pm
Posts: 307
Location: Mackay

You hear all these stories bout when you see them it's another thing!

What was that Steve, the k?

Top

My_Mini_Rocks

Post subject:

Posted: Tue Feb 23, 2010 4:23 pm

848cc

Joined: Tue Aug 23, 2005 5:38 pm
Posts: 487
Location: Minisport, S.A.

Here is a double row bearing blowup in a client's moke
http://www.youtube.com/watch?v=ho0a5XXoXq4

-Andrew

_________________
Andrew@Minisport, South Australia
Ph: 08-8177-1275
Skype: minisport.au

www.minisport.com.au
Minisport for all your mini parts

Top

mini99

Post subject:

Posted: Tue Feb 23, 2010 4:24 pm

848cc

Joined: Tue Jul 15, 2008 11:51 am
Posts: 27
Location: Gladstone

This is what happens when you lose control and smash into a traffic island.
Wasn't me honest!

Top

mini99

Post subject:

Posted: Tue Feb 23, 2010 4:35 pm

848cc

Joined: Tue Jul 15, 2008 11:51 am
Posts: 27
Location: Gladstone

Here's another one I have. This is what happens if you dont fold over the locking tabs on the bolts securing the main gearbox bearing.
The bolt comes loose and rolls around in the sump till it gets wedged between the diff gear and the sump. It put a hole in the sump casing and the diff gear "machined" the bolt down. I was reversing down the driveway then Bang!. I couldn't go back any further so drove straight back into the shed to investigate.

Top

mini_mad_matt

Post subject:

Posted: Tue Feb 23, 2010 5:10 pm

1098cc

Joined: Tue Aug 05, 2008 8:03 pm
Posts: 1479
Location: Qld, Brisbane

I don't have any pictures, but a little honda v-twin engine, 670cc 4 stroke that i pulled apart yesterday had seized one big end, broken the other off the crank, broke both rods in half, cracked the block and smashed the bottom of the bore sleeve out of shape. not to mention broke off the skirt of a piston.

It's going to get a rebuild though

Top

littleminik

Post subject:

Posted: Tue Feb 23, 2010 5:41 pm

848cc

Joined: Wed Dec 30, 2009 4:17 pm
Posts: 37
Location: NSW, Australia

Ouch!! Those gearbox failures look NASTY!!
Things that make you go HMMM!

_________________
1970 Mini K

Top

GT mowog

Post subject:

Posted: Tue Feb 23, 2010 5:49 pm

Mods rock!

Joined: Fri Oct 03, 2008 9:02 pm
Posts: 5079

littleminik wrote:

Ouch!! Those gearbox failures look NASTY!!
Things that make you go HMMM!

Nah, these none of that, they're all trophies :!:

Top

littleminik

Post subject:

Posted: Tue Feb 23, 2010 5:57 pm

848cc

Joined: Wed Dec 30, 2009 4:17 pm
Posts: 37
Location: NSW, Australia

GT mowog wrote:

Nah, these none of that, they're all trophies :!:

Yea true hey

_________________
1970 Mini K

Top

My_Mini_Rocks

Post subject:

Posted: Mon Mar 01, 2010 9:41 am

848cc

Joined: Tue Aug 23, 2005 5:38 pm
Posts: 487
Location: Minisport, S.A.

Here is one for you,
Don't leave rags in gearboxes! we just pulled this apart for a client!

Rag on the oil feed pickup filter

Rag in hand next to the oil feed pickup feed filter, you can see how the oil suction has bent the filter up.

what one should look like!

Why anyone would leave a rag in a gearbox has me astounded!

_________________
Andrew@Minisport, South Australia
Ph: 08-8177-1275
Skype: minisport.au

www.minisport.com.au
Minisport for all your mini parts

Top

michaelb

Post subject:

Posted: Mon Mar 01, 2010 9:48 am

1275cc

Joined: Sun Jan 21, 2007 9:16 pm
Posts: 3166
Location: North of the Harbour planning my next mini project

Quote:

Why anyone would leave a rag in a gearbox has me astounded!

So as to soak up the oil before it leaks out of the gearbox!

_________________
1969 Cooper "S"
1967 Mini Deluxe
1973 Clubman Van (the fleet spare)
1978 ex 1275 LS ("Wizard" Eaton Supercharged)

2015 HSV GenF GTS(occasional drive & tow car)
2019 MINI F55 Cooper S

Top

Page 2 of 3

[ 36 posts ]

Go to page Previous 1, 2, 3 Next

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Who is online

Users browsing this forum: No registered users and 324 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: